• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Recent content by charcoal

the hawken shop
muzzle loading side side shotguns
Shop deals on ebay
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    An American Percussion Long Rifle That Has Been In My Family for Many Generations Possibly by John Hinds

    Funny, I was going to accuse TFoley of a non sequitur.
  2. C

    My newest 1803 Harper’s Ferry (sporter)

    It's been pretty well established that Lewis had 15 of these guns, prototypes, made to take with him on the Corps Of Discovery. Two of the originals have been found, the first being number 15 and in the St Louis area where the Corps auctioned off everything when they returned. Flint locks of...
  3. C

    Load Data for my Cannon

    I'll have to look for the '2 inches or greater' again.
  4. C

    Load Data for my Cannon

    Notwithstanding those are not maximum loads, that chart indicates a MUCH lighter load than they show here: http://www.americanartillery.org/aaa/marty.html Ten Basic Safety Regulations Powder charges should not exceed 2 oz. of Fg or 3 oz. FFA or Cannon Grade Goex powder per inch of bore...
  5. C

    Flash in the pan

    That was my first thought.
  6. C

    Percussion Rifles Beginning?

    Has anyone ever seen evidence, possibly gleaned from diaries, letters, etc. of any percussion arms being used at the Alamo?
  7. C

    Percussion Rifles Beginning?

    A central fire cartridge had the primer on the inside of the base and in the center of the base where the firing pin hit just as with the centerfire. There was no visible sign of it on the outside of the base, the base on the outside being smooth and continuous. When they started making...
  8. C

    Percussion Rifles Beginning?

    Just a note: Between the rimfire and the centerfire was the centralfire.
  9. C

    Legitamate Inline...

    It was probably an improvement over the Halls design, which leaked so bad at the breech that the muzzle velocity/energy was severly compromised.
  10. C

    Newbie with serious issue

    I checked to make sure the ball was down all the way on whatever it was on. The little bit of powder I could get in through the nipple orifice I knew wouldn't have overcharged it. So there ya go.
  11. C

    Minie Bullet advice - .58 cal Musket Newbie

    I used a 50/50 mix of melted parafin wax and lithium grease. I dipped the mini-ball nose first in, to just depth of the edge of the base. Pulled them out and set them to cool.
  12. C

    Newbie with serious issue

    About 30 years ago I had an interesting occurrence. I was working the midnight ride in the Locomotive Shop. My foreman was a half-assed gunsmith and we had talked guns from time to time, so he knew I was into muzzleloading. Well, someone brought a .50 cal Hawken to him one day telling him...
  13. C

    Newbie with serious issue

    HUH????
  14. C

    Hello from Indy.

    Ok JW, I'm thinking now the guy's name might have been Roose. Been a long time, but I think he was from Lagrange,IN.
  15. C

    Hello from Indy.

    Welcome JW. Are you John and have you ever been to Lagrange or Ft Gordon, Ga?
See more
Back
Top