Can a percussion lock and barrel fit into a flintlock stock without any work? (TC HAWKEN stock)
-
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
TC LOCK SWAP
- Thread starter COTNTOP
- Start date
Help Support Muzzleloading Forum:
Without any work? You will have to use a screwdriver and possibly some kind of tool to get the barrel wedge out. Don’t know if you consider that ‘work’. I have also heard some say that a small sliver of wood needs to be removed for a percussion lock to fit a stock originally made for a flintlock, though I have never found it necessary.
It should drop right in. I once went from a percussion to a flintlock, that needed some wood removed.
SDSmlf, you forgot to mention one more chore, remove the ram rod.
SDSmlf, you forgot to mention one more chore, remove the ram rod.
Last edited:
I've changed them out without any issues.
Dirty Mike
40 Cal
- Joined
- Feb 13, 2022
- Messages
- 163
- Reaction score
- 83
Fits just fine
I have some TC locks that will not fit in certain TC stocks. Not always drop-in interchangeable.
Dirty Mike
40 Cal
- Joined
- Feb 13, 2022
- Messages
- 163
- Reaction score
- 83
I haven't had that problem yet luckily but I did have to auger out some wood when I put my deerslayer trigger in
