• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Finished Jim Chambers PA Fowler

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I enjoyed the pictures of the excellent gun that is now fully usable by you! You're surely very content with the end result!
I'd not seen before, the screw placement into the heel of the butt plate. That's what I like about seeing all the pictures that
you folks share, the little differences in the details are Great!
 
Here are some pics of my Jim Chambers PA Fowler I just finished up. I started this build in June of 2021 after I picked up my Kit from Jim and Barbie at the NMLRA nationals in Friendship IN. It has been a great experience and I have learned so many new skills during this project. I owe a lot to my friend and mentor Jeff Talbert. I visited his shop on many occasions where he taught me everything from inletting to carving. Dave Person has also been a great resource with his extensive knowledge of these early smoothbore fowlers.

I have included a link to my "build along" thread at the bottom.

I hope you enjoy the pictures!

Jim Chambers PA Fowler:
20g/.62 caliber
Maple
7lbs
Finished with two coats of Iron Nitrate, one coat of Laurel Mountain Forge Honey Maple, Jim Chambers gunstock oil.
The iron has been French Greyed with Jax Brass Black.

PXL-20220514-133744659.jpg

PXL-20220514-133738618.jpg


I made this powder horn for this gun. The bag was made by Dennis Massie.
PXL-20220514-133934804.jpg

PXL-20220514-134110311.jpg

PXL-20220514-134606614.jpg

PXL-20220514-134616924.jpg

PXL-20220514-133733951.jpg

PXL-20220514-133705934.jpg

PXL-20220514-133651668.jpg


PXL-20220514-133602636.jpg

PXL-20220514-133539761.jpg

PXL-20220514-134708622.jpg

PXL-20220514-134742459.jpg

PXL-20220514-134754833.jpg

PXL-20220514-134756733.jpg

PXL-20220514-134830918.jpg

Firing-It3.jpg

Firing-It2.jpg


Below is the link to my Build along post:
https://www.muzzleloadingforum.com/threads/my-next-build-jim-chambers-pa-fowler.133414/
What a beauty! And that bag matches it well!!!
 
As stated above: Beautiful Fowler and excellent pictures!

That gun in all iron furniture would be my perfect Fowler I do believe.
 
Back
Top