• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD WTS: T/C Renegade .54cal

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Feb 7, 2021
Messages
171
Reaction score
77
Hello,
I have for sale a Thompson Center Renegade in .54cal, excellent condition. I believe this is a kit rifle, the s/n starts was K. I bought it assembled. The bore and rifling are excellent, no corrosion whatsoever. The metal is 90%; there is an area near the muzzle with the finish is worn. (see photos) The wood is 90-95% with the usual handling marks. Williams FP target peep sight and the original rear sight assembly. The front sight was milled to .070” thick for better sight picture. 400.00 shipped. PM or email for any questions. More photos on next post. Thanks for looking. NOTE: Cross Posted.
 

Attachments

  • IMG_0746.jpeg
    IMG_0746.jpeg
    1.8 MB · Views: 7
  • IMG_0747.jpeg
    IMG_0747.jpeg
    1 MB · Views: 0
  • IMG_0748.jpeg
    IMG_0748.jpeg
    1.6 MB · Views: 0
  • IMG_0749.jpeg
    IMG_0749.jpeg
    2 MB · Views: 0
  • IMG_0750.jpeg
    IMG_0750.jpeg
    2.9 MB · Views: 0
  • IMG_0751.jpeg
    IMG_0751.jpeg
    783.6 KB · Views: 0
  • IMG_0752.jpeg
    IMG_0752.jpeg
    4 MB · Views: 0
  • IMG_0753.jpeg
    IMG_0753.jpeg
    2.9 MB · Views: 0
  • IMG_0754.jpeg
    IMG_0754.jpeg
    3.3 MB · Views: 0
  • IMG_0745.jpeg
    IMG_0745.jpeg
    1.3 MB · Views: 0
Last edited:
More photos
 

Attachments

  • IMG_0755.jpeg
    IMG_0755.jpeg
    537.6 KB · Views: 0
  • IMG_0756.jpeg
    IMG_0756.jpeg
    2.3 MB · Views: 0
  • IMG_0757.jpeg
    IMG_0757.jpeg
    2.3 MB · Views: 0
  • IMG_0758.jpeg
    IMG_0758.jpeg
    2.3 MB · Views: 0
  • IMG_0759.jpeg
    IMG_0759.jpeg
    2.1 MB · Views: 0
  • IMG_0760.jpeg
    IMG_0760.jpeg
    1.9 MB · Views: 0
  • IMG_0761.jpeg
    IMG_0761.jpeg
    1.9 MB · Views: 0
  • IMG_0762.jpeg
    IMG_0762.jpeg
    1.9 MB · Views: 0
Nice finish on the stock. Most of the kit guns have rounded off edges on the lock panels from a ham haded application of 150 grit paper… well done!
 
Status
Not open for further replies.
Back
Top