• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD TOW Kentucky Flintlock Pistol Kit

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Dec 12, 2018
Messages
846
Reaction score
740
Location
York County Pennsylvania
I have for sale one of my projects that I'll never get started let alone finish. This was to be my Pennsylvania Flintlock Deer season pistol. It is a Track of The Wolf Kentucky Pistol kit. The stock is nicely figured maple, all of the parts are from Track, except the small Siler Flintlock came from Jim Chambers assembled, and the barrel that Bobby Hoyt made for me. A 7/8" 50 caliber , 1 in 20 twist, you can see Mr. Hoyts trademark narrow land and wide groove rifling. His barrels are shooters. This kit purchased from Track now runs well over $700 with the Green Mountain barrel. I'm asking $550 and $20 towards the shipping. I'll ship it anywhere a USPS Large Flat Rate Box will Take it.


Please see the photos and private message me with any questions. The finished pistol photo is from Tracks Catalog

Thanks,
O.R
 

Attachments

  • IMG_4380.jpg
    IMG_4380.jpg
    139.8 KB · Views: 6
  • IMG_4379.jpg
    IMG_4379.jpg
    132.9 KB · Views: 0
  • IMG_4382.jpg
    IMG_4382.jpg
    58.4 KB · Views: 0
  • IMG_4387.jpg
    IMG_4387.jpg
    60.4 KB · Views: 0
  • IMG_4388.jpg
    IMG_4388.jpg
    61.1 KB · Views: 0
  • IMG_4389.jpg
    IMG_4389.jpg
    154.4 KB · Views: 0
  • IMG_4390.jpg
    IMG_4390.jpg
    118.3 KB · Views: 0
  • TRACK Pistol.jpg
    TRACK Pistol.jpg
    72.9 KB · Views: 0
  • IMG_4391.jpg
    IMG_4391.jpg
    191.3 KB · Views: 0
  • IMG_4392.jpg
    IMG_4392.jpg
    171.1 KB · Views: 0
Last edited:
Additional NC Material, Information, and photos added to the offer.
To make this a complete package, I'm including this 2 CD set Building Flintlock Pistols with Mike Miller for no additional cost. This is a $30 set.

Please see below and the Photos in my above message

Thanks,
O.R.


<CLIP>

Building Flintlock Pistols with Mike Miller - 2 disks​


These two disks feature talented full time traditional gun builder Mike Miller from Paducah Kentucky. Mike is building a very fine flintlock Kentucky pistol starting with a premium curly maple stock blank & then fabricating most of the parts. The tapered & flared Bob Paris barrel is inlet with hand tools; the brass mounts including the ramrod pipes & muzzle cap, sights, tenon, trigger & side plate are all fabricated. Mike demonstrates a neat technique to swage out & inlet a brass butt cap. He also installs a touchline vent liner, relief carves the stock & adds a beautiful traditional finish over the nitric acid stain. Three-hour run time.
 

Attachments

  • IMG_4369.jpg
    IMG_4369.jpg
    129.5 KB · Views: 0
  • IMG_4371.jpg
    IMG_4371.jpg
    127.1 KB · Views: 0
  • IMG_4370.jpg
    IMG_4370.jpg
    134.3 KB · Views: 0
  • IMG_4372.jpg
    IMG_4372.jpg
    118.8 KB · Views: 0
  • IMG_4373.jpg
    IMG_4373.jpg
    114.4 KB · Views: 0
  • IMG_4374.jpg
    IMG_4374.jpg
    146.5 KB · Views: 0
  • IMG_4375.jpg
    IMG_4375.jpg
    154.4 KB · Views: 0
  • IMG_4376.jpg
    IMG_4376.jpg
    144.8 KB · Views: 0
  • IMG_4377.jpg
    IMG_4377.jpg
    158.9 KB · Views: 0
  • IMG_4378.jpg
    IMG_4378.jpg
    140.6 KB · Views: 0
Last edited:
Status
Not open for further replies.

Latest posts

Back
Top