Need a reasonable priced rear sight for a renegade. Don't have to be in pristine condition. Just functional. Any style will work. Looking like it is .82 hole spacing
Thanks
Thanks
Last edited:
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
CLOSED Rear sight for renegade
- Thread starter Slinginslugs
- Start date
Help Support Muzzleloading Forum:
- Status
i think you might need to measure screw hole c to c , i believe there are two sizes. . bubba .50 might help on that.
Last edited:
michacooks
32 Cal
had that problem with my renegade rear sight, had to have a gunsmith machine the sight so it would match up to the holes on the barrel
- Joined
- Apr 28, 2005
- Messages
- 1,344
- Reaction score
- 39
I will check my shop for you Sunday or Monday I may have one.
Thanks
- Joined
- Apr 28, 2005
- Messages
- 1,344
- Reaction score
- 39
I have someone else who wants the .54 bullets it you have not sent the money for them. let me know.
Brian
Brian
OK sell them sorry
- Joined
- Apr 28, 2005
- Messages
- 1,344
- Reaction score
- 39
I will go to my shop Tomorow and look I did not feel good today. I could not find this post earlier .
No problem thanks!
- Joined
- Apr 28, 2005
- Messages
- 1,344
- Reaction score
- 39
no luck , but check this site out. (cfnparts.com) they may be able to help you.
Brian
Brian
Thanks everyone. I think I found what I needed.
- Status
Similar threads
