• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD For sale Allen box lock with barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
May 23, 2019
Messages
52
Reaction score
65
Here is an Allen box lock action that has some cleaning up of the cast surface. The barrel is 32 inches long, is 1 1/8 inches at the rear and just under 1 inch at the muzzle. The octagonal section is 8 inches long. The barrel has relatively fast deep 7 groove rifling ( SWAG 45 to 50 twist ). The maker of the barrel is unknown.
$350.00 plus shipping
 

Attachments

  • DC1786D6-D17F-4ABC-9202-84E55F2DDFF1.jpeg
    DC1786D6-D17F-4ABC-9202-84E55F2DDFF1.jpeg
    1.9 MB · Views: 3
  • 75C7C991-65A2-47B5-ADCC-76C632A10750.jpeg
    75C7C991-65A2-47B5-ADCC-76C632A10750.jpeg
    2.2 MB · Views: 0
  • C832077C-B438-4174-A976-F426112C4C79.jpeg
    C832077C-B438-4174-A976-F426112C4C79.jpeg
    1.7 MB · Views: 0
  • 6ED35318-E772-4F40-B99E-FC01AB5C3069.jpeg
    6ED35318-E772-4F40-B99E-FC01AB5C3069.jpeg
    798.1 KB · Views: 0
  • C864B3D5-6DFC-4DCB-8266-977A03B40194.jpeg
    C864B3D5-6DFC-4DCB-8266-977A03B40194.jpeg
    2.1 MB · Views: 0
Whoops! Left out the most important thing. It’s hard to get an accurate measurement with calipers on a barrel with an odd number of grooves but it is .58 Caliber.
 
I don’t have the necessary tools to completely tighten the barrel. I clamped the barrel in a vise with soft jaws and was able to turn the action to within a half round. There are witness marks to show barrel alignment.. I believe it will tighten up correctly..
 
Here is an Allen box lock action that has some cleaning up of the cast surface. The barrel is 32 inches long, is 1 1/8 inches at the rear and just under 1 inch at the muzzle. The octagonal section is 8 inches long. The barrel has relatively fast deep 7 groove rifling ( SWAG 45 to 50 twist ). The maker of the barrel is unknown.
$350.00 plus shipping
Where did he go?
Is he still alive?
 
Status
Not open for further replies.

Latest posts

Back
Top