AZ Muzzleloaders
Dave Puvogel
50 caliber, 42" x 13/16" (yes 13/16"). Noted on Doc's inventory (I bought out his remaining stock last April) as a Green River Rifle Works barrel, but no barrel markings.
4 underlugs installed/drilled and inlet into the stock. Stock is not drilled for barrel pins.
I do not know if the barrel is used or new. Bore is bright and shiny. Rate of twist is about 1:56 or 60.
Breech plug installed and inlet into the stock.
Raised rear sight platform with dovetail cut for rear and front sights.
Barrel engraved G B White.
"Poor Boy" style stock is 90 percent shaped. A little figure, but not much.
Stock is marked for a 13 3/4" length of trigger pull. Could be made longer.
Barrel has been browned and is drilled for a vent liner or drum.
Asking $500 plus actual shipping.
PM with questions.
Thanks,
Dave
4 underlugs installed/drilled and inlet into the stock. Stock is not drilled for barrel pins.
I do not know if the barrel is used or new. Bore is bright and shiny. Rate of twist is about 1:56 or 60.
Breech plug installed and inlet into the stock.
Raised rear sight platform with dovetail cut for rear and front sights.
Barrel engraved G B White.
"Poor Boy" style stock is 90 percent shaped. A little figure, but not much.
Stock is marked for a 13 3/4" length of trigger pull. Could be made longer.
Barrel has been browned and is drilled for a vent liner or drum.
Asking $500 plus actual shipping.
PM with questions.
Thanks,
Dave