• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

CLOSED .5755 sizing die for 58 cal. bullet $50. shipped PENDING ON HOLD.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

steg49

40 years of muzzle loading
MLF Supporter
Joined
Feb 5, 2010
Messages
307
Reaction score
189
Location
California
This die is unmarked but sizes to .5755 or .576. Push through type. $50 shipped first class USPS. I take personal check or USPS Money Order. steg49
 

Attachments

  • IMG_0230.jpg
    IMG_0230.jpg
    97.8 KB · Views: 5
  • IMG_0231.jpg
    IMG_0231.jpg
    137.8 KB · Views: 0
  • IMG_0232.jpg
    IMG_0232.jpg
    112 KB · Views: 0
  • IMG_0234.jpg
    IMG_0234.jpg
    76.3 KB · Views: 0
I used a rounded end stick and a soft mallet and tap them through. I don't think this one will fit in a loading press but it has a ring around the middle that is slightly larger than the body so a proper size hole could be drilled through a piece of wood and the die slipped in the hole to hold it then just tap the mini balls through it. steg49
 
Status
Not open for further replies.
Back
Top