• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Search results

shop deals on amazon
Shop deals on ebay
muzzle loading side side shotguns
L & R
Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. P

    Broken Mainspring

    I've had three springs break on me. All three were pedersolis (2 brown besses, and one Penn.) The first one was when the lock was nearly new, and I blamed it on poor casting. The second was on an old, well used, but well taken care of bess, and it was -17F out- I blamed it on the temperature...
  2. P

    tuning the flintlock

    I think both parties have valid points, so I thought I'd add my .02 before this turns into another pissing contest ala the cleaning/loading jag discussion, indian made pipe bombs discussion, etc. Paul has been very helpful to me when I needed help tuning my lock, and on other subjects. Some of...
  3. P

    Jager questions

    A good book to pick up is "jaeger rifles" by Shumway Link It has tons of Photographs and is arranged by region. Keep in mind that true Jaegers were custom made so there really no two alike. They all had typical characteristics, but there is not a "standard jaeger" This has pro's and cons of...
  4. P

    Ball in Bess REALLY stuck in the bore!

    I've pulled the plug on an italian Bess, they are tight, but it did come loose eventually. I used a mallet and wrench and "impacted" it off. In the process, I did shear off the rear lug for pinning the stock. I tried on another occasion to pull the plug on a pedersoli "pennsylvania rifle." I...
  5. P

    Ball in Bess REALLY stuck in the bore!

    If you can't pull it, you may have to pull the breech plug and hammer it out. If you don't know how it got there in the first place, it may be worthwhile to do anyway just to be safe. It sounds like a dry ball, but be sure to soak the barrel in water to be sure that there is absolutely not a...
  6. P

    Wrinkled Roundballs?

    is that the working temperature then for casting?
  7. P

    Wrinkled Roundballs?

    What is a good temperature for pure lead? I've been using a cast iron pot over a propane burner. It seems OK, but I'm still fiddleing with trying to find the proper temp. Cheers, Pat
  8. P

    Starting load for a 20g trade gun?

    Great info guys! As always, it is appreciated. Cheers, Pat
  9. P

    Starting load for a 20g trade gun?

    What's a good starting shot load for a 20g trade gun? We're going to try to shoot some clays this weekend. The only shot I have is 7 1/2. will that work OK? Thanks! Pat
  10. P

    Small Game With Fifty Cal?

    It just adds to the challenge. it is pretty neat to do- dead squirrel, no loss of meat or lead in the dinner. Just be sure they're dead and not just knocked out! I don't know if it's factual, but the legend is that you could then dig the ball out of the tree and recast it. When I used to only...
  11. P

    Dixie Flint Jaeger Info Needed

    I considered one, it's a really nice looking rifle, but in the end decided it really wasn't a Jaeger, but just a short barreled full stock. I considered buying it and modifying it to make it more "jageresque" but in the end decided I may as well buy the parts to have a "real" Jaeger. I'm not...
  12. P

    A question about two different lock manufactures

    I have a Davis "jaeger" lock. It is a very nice lock. My only complaint is that the mainspring is really heavy. It was smashing flints to pieces after only a few shots. I purchased a replacement spring, and worked it down as reccomended to me by Paul. It works flawlessly now. I did keep the...
  13. P

    Ram Rod Tips?

    I'm not sure I follow- I'm assuming that Mark would epoxy and pin the tips on first, then finish the rod with linseed, therefore it would be linseed over epoxy, same as the treatment I spoke of. Best regards, Pat
  14. P

    Ram Rod Tips?

    I'm not a master gunbuilder by any means, but I've put together a few firearms. FWIW, I've bedded modern barrels with epoxy, and made internal repairs on ML rifles with epoxy, such as building up the mortice behind a lock, tightening up a wobbly rammer thimble, or bedding the tang on an overly...
  15. P

    Buck and Ball Reprised

    :grin: Yea, us paratroopers were usually much better at making messes than cleaning them up! Cheers, Pat
  16. P

    Buck and Ball Reprised

    Good Points, on both parts. Paul, I remember when I was fighting in panama, we had some guys in a warehouse that kept sniping at us. We couldn't seem to get them with our small arms, so we called in some CAS, they brought in an AC-130 and it leveled the building. That's how you clear a house...
  17. P

    Buck and Ball Reprised

    "Look at it this way, in battle you really do not want to kill the dude, just maim. If you kill him you take out ONE person, if you severley injur him it takes out TWO more that have to drag him outta harms way! At least thats how it used to work" No offense, but every time I was in a battle, I...
  18. P

    Casting round ball

    Thanks Again everyone. This gives me a lot of info. As a side note, I was given an old rapine .715 mould over the weekend. It's simply marked "Rapine .715." The new one Says "Rapine .600 PATRIOT" on it. Probably just capitalizing on the movie, but I thought it was noteworthy. It is a very...
  19. P

    Casting round ball

    I had the heat seeing about 1/2 way on the electric pot. I did smoke the inside of the mould, do I need to do this between each ball? I'll order some of the release agent. Thanks Guys! Pat
  20. P

    Casting round ball

    I got my new rapine bullet mould saturday for my Jager. it's a .600 RB. I tried using my lee bottom pour pot, but wasn't having a lot of luck. the balls seemed to be "swirly" looking, like the mould was too cold or something. At the same time, I was melting down some roofer's lead in a iron pot...
Back
Top