• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Unmentionable powder measure

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jul 11, 2019
Messages
690
Reaction score
867
IMG_2899.jpegIMG_2900.jpegIMG_2901.jpeg
I was looking for a 50 grain fixed powder measure. I took a .308 case and sawed off the bottom. Stuck the neck into a round ball and pounded it in. Holds 50 grains for my Kibler .45 SMR. Just something to try.
 
Been using those closed-end hollow brass thingies as powder measures for years! Just saw off the length needed for any particular load.
You see, we are doing our sport a favor - if we keep using those things for anything other than their original purpose, pretty soon there will be no more of them, and the original users will have to resort to good, honest muzzle stuffers.
 
Back
Top