• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Shooting a 170-year-old Colt Pocket

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 16, 2021
Messages
90
Reaction score
173
Location
Tempe, AZ
Now this was a fun experience... firing a couple cylinders of .31-caliber ball out of a 170-year-old Colt 1849 Pocket (manuf. 1854).

Function was perfect, with minimal clogging up of the works from the fired caps. Accuracy was decent. What an absolute blast!

1000016867.jpg


 
That’s awesome! I am in the market for an 1849 pocket Uberti but if a shootable original came along for the right price, I’d be all over that!
 
That’s awesome! I am in the market for an 1849 pocket Uberti but if a shootable original came along for the right price, I’d be all over that!
Shootable examples are out there to be found, and for a "reasonable" price, but you'll need to be both patient and ready when the right one comes along! Go for it if/when the right one comes along. As infrequently as I'm willing to actually shoot any 1849 Pocket, owning a functioning antique definitely winds my clock. :)
 
Cool. Looks like your range has a very effective indoor exhaust system, which I would find very important when shooting black powder inside!
It's definitely an effective system -- depending on the bay, sometimes too much so. Bay #1 has a steady breeze of at least 10mph, and it gets mighty cold when the A/C kicks on! This was recorded on bay #6, the last position in room 1 (of two) in the facility's "rifle" section. Smoke from this little .31-cal wasn't much, and way less than when I shoot certain 44 special smokeless powder "cowboy" loads.
 
Really interesting to hear that the original functioned flawlessly when we hear so many folks say that they can not get their reproductions to function properly.
 
Really interesting to hear that the original functioned flawlessly when we hear so many folks say that they can not get their reproductions to function properly.
The main issue with these small "pocket" pistols is their sensitivity to getting gunked up. Repro or artifact, it'll be the same.

Sure, it worked perfectly for 10 rounds, but if I'd gone 20, I'd wager there would have been fouling-induced trouble.

Pocket pistols -- especially the 1849 -- were for deterrence, even if effective (enough) at close range. It's not intended nor suited for extended firing.

It's still a fun gun to shoot, but a man has got to know his (gun's) limitations. 😉
 
The main issue with these small "pocket" pistols is their sensitivity to getting gunked up. Repro or artifact, it'll be the same.

Sure, it worked perfectly for 10 rounds, but if I'd gone 20, I'd wager there would have been fouling-induced trouble.

Pocket pistols -- especially the 1849 -- were for deterrence, even if effective (enough) at close range. It's not intended nor suited for extended firing.

It's still a fun gun to shoot, but a man has got to know his (gun's) limitations. 😉
Well said. I'd have to spend the money to have Colt research it, see where it shipped, etc. I would hope it shipped to San Francisco, into a 49ers pocket or belt to keep Claim Jumpers away!!
 
Back
Top