• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Plain Maple Colonial is finished

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
This is so handsome in it's simplicity, that it almost looks "hyper-modern" in an odd way! The lines are like that of a super-sonic jet fighter, it's so clean and un-cluttered! I really like when someone breaks from the "super curly" shibboleth and works with a solid, plain, piece of wood. Beautiful photos, what a treasure!
Thank you Sir for that comment. Much appreciated
 
60 hours later here it is. Standard grade sugar maple stock. This is my first attempt at putting together a muzzleloader kit. What a experience it was! I found myself constantly visiting this forum searching up old threads for guidance and help. Would have been vastly more difficult without it so huge thanks to the forum and it's members. Of course, Jim Kibler's YouTube videos were invaluable as well. I started this project expecting every step to go perfectly and quickly learned that I'd better be happy with" good enough" or I was going to drive myself crazy. There were victories and there were defeats, all part of the experience. Even long before I started this kit I had a vision in my mind of how I would want a rifle to look based on personal preference and authenticity. Dark plain maple stock with a scraped finish,a few tool marks here or there wouldn't bother me. Metal parts finished in the white. Brass not too polished. No carving. Just a plain old workhorse rifle that is going to see a lot of time in the mountains. Some details: 54 caliber, stock was stained with two fairly heavy coats of iron nitrate and then heat was applied. Tried and True varnish finish 3 coats so far but may add another one or two. If your on the fence about putting together one of these kits like I was, just do it! The experience and knowledge learned is priceless and you will have a beautiful quality made longrifle that you can be proud of forever. Thanks Jim Kibler for giving folks that opportunity.View attachment 214865View attachment 214866View attachment 214867View attachment 214868View attachment 214869View attachment 214870View attachment 214871View attachment 214872
Great job, nice and clean.
 
60 hours later here it is. Standard grade sugar maple stock. This is my first attempt at putting together a muzzleloader kit. What a experience it was! I found myself constantly visiting this forum searching up old threads for guidance and help. Would have been vastly more difficult without it so huge thanks to the forum and it's members. Of course, Jim Kibler's YouTube videos were invaluable as well. I started this project expecting every step to go perfectly and quickly learned that I'd better be happy with" good enough" or I was going to drive myself crazy. There were victories and there were defeats, all part of the experience. Even long before I started this kit I had a vision in my mind of how I would want a rifle to look based on personal preference and authenticity. Dark plain maple stock with a scraped finish,a few tool marks here or there wouldn't bother me. Metal parts finished in the white. Brass not too polished. No carving. Just a plain old workhorse rifle that is going to see a lot of time in the mountains. Some details: 54 caliber, stock was stained with two fairly heavy coats of iron nitrate and then heat was applied. Tried and True varnish finish 3 coats so far but may add another one or two. If your on the fence about putting together one of these kits like I was, just do it! The experience and knowledge learned is priceless and you will have a beautiful quality made longrifle that you can be proud of forever. Thanks Jim Kibler for giving folks that opportunity.View attachment 214865View attachment 214866View attachment 214867View attachment 214868View attachment 214869View attachment 214870View attachment 214871View attachment 214872
Lovely. Nice clean look.
 
60 hours later here it is. Standard grade sugar maple stock. This is my first attempt at putting together a muzzleloader kit. What a experience it was! I found myself constantly visiting this forum searching up old threads for guidance and help. Would have been vastly more difficult without it so huge thanks to the forum and it's members. Of course, Jim Kibler's YouTube videos were invaluable as well. I started this project expecting every step to go perfectly and quickly learned that I'd better be happy with" good enough" or I was going to drive myself crazy. There were victories and there were defeats, all part of the experience. Even long before I started this kit I had a vision in my mind of how I would want a rifle to look based on personal preference and authenticity. Dark plain maple stock with a scraped finish,a few tool marks here or there wouldn't bother me. Metal parts finished in the white. Brass not too polished. No carving. Just a plain old workhorse rifle that is going to see a lot of time in the mountains. Some details: 54 caliber, stock was stained with two fairly heavy coats of iron nitrate and then heat was applied. Tried and True varnish finish 3 coats so far but may add another one or two. If your on the fence about putting together one of these kits like I was, just do it! The experience and knowledge learned is priceless and you will have a beautiful quality made longrifle that you can be proud of forever. Thanks Jim Kibler for giving folks that opportunity.View attachment 214865View attachment 214866View attachment 214867View attachment 214868View attachment 214869View attachment 214870View attachment 214871View attachment 214872
Beautiful job
 
Back
Top