• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Just picked up a Pedersoli Mortimer and I have some questions.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Dec 4, 2020
Messages
75
Reaction score
75
Location
Millersville, Maryland
Sadly my neighbor passed back in March. He was an avid outdoorsman and hunter and loved muzzleloaders. One of his Muzzleloaders I was able to purchase was a Pedersoli Mortimer .54/12ga combo flintlock. I picked it up for $350. It needs a flint and the piece of leather that goes in the jaws as well as a good cleaning. It has some rust down the bore and in the touch hole but not anything too crazy. I just wanted to know what size flint and leather the lock takes on this rifle and what place is the best to buy flints from. Also on a side note the rear sight is damn hard to see through. Anyone know of a better rear sight to upgrade to ?
 

Attachments

  • 20230905_063725.jpg
    20230905_063725.jpg
    415.7 KB · Views: 8
i sol my Mortimer, and I miss it.
the sight is a odd width as I recall. I was going to make a blank and fit a standard sight on top. Pedersoli also makes a tang sight that might fit.
 
i sol my Mortimer, and I miss it.
the sight is a odd width as I recall. I was going to make a blank and fit a standard sight on top. Pedersoli also makes a tang sight that might fit.
Yea I have the tang creedmoor one that came with the rifle I just wanted to see if there were better sights out there for the rear.
 
a Mortimer for 350.00! with what appears to be a tang ladder sight ! for 350.00! you sir have scored!
3/4 inch flint and the others already told where.
350.00!!!!!!!!!!!! wow.
Deals like that are indeed out there. I bought one at a gun show a few years ago for $450. Unfortunately I had no idea what I was buying. He had 4 more pedersoli's priced the same. I only bought the Mortimer because of the hook breach. I passed on charleville and a Bess and whatever else he had I should have bought them all and I did have the cash on hand.
It's the rifle on the top in this picture
20230901_202846.jpg

My son shooting it a few months back
20230113_100442_019_saved.jpg
 
Back
Top