• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

I don't think Dad's Hawken is going to hunt

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Agree. I would use a piece of scotch brite and just insert it down over the bad spot down by the breech and concentrate back and forth over that one spot to see if you can smooth down the edges of the gashes. Check this out: LINK
The You Tube link inserted is a good one. The only thing I do different is to pull the breech plug and clamp the barrel in a padded vise. I have also poured a lead lapping plug around a steel patch rod tip and used valve grinding compound to lap the barrel, that way I get the lands and groves polished at the same time. I understand not everyone has the equipment or ability to pull the breech or pour a lead lap. But I like to "refresh" the whole bore and yes it's labor intensive.
edit: You could also try fire lapping with greased patches and valve grinding compound. Get in a lot of shooting in that way.:)
 
Last edited:
Back
Top