Does anyone know where I might find an adjustable front sight replacement for a 1858 Pietta REM? Presently my front sight is a non adjustable post.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
1858 REM front sight
- Thread starter Salty
- Start date
Help Support Muzzleloading Forum:
BeardedGunsmith
40 Cal
If your gun is the same as mine, it'll likely require either a base that will need the barrel drilled and tapped or a dovetail to be cut into the barrel. But there's a few other ways to go about it too.
Last edited:
The easier solution might be to sell it and buy a target model.
Buy a Uberti Remington front sight and have it dovetailed into the barrel. It will be correct and windage adjustable too.
The new piettas 1858's have a dovetail frontsight now in 44 and 36.
https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=67&cat=Pietta+1858+Remington,+Tiro
I had to replace one and got it here.
https://www.vtigunparts.com/store/shopdisplayproducts.asp?id=67&cat=Pietta+1858+Remington,+Tiro
I had to replace one and got it here.
