• Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

TC Tang Sight

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Before filing down the sight or cutting away any wood, try shimming the sight first.
I made my shims out of aluminum for my Renegades. I cut them from a solid aluminum block. I made them the entire length of the peep sight. The shim on one of my Renegades is a lot thicker than the shim on my other Renegade. Shim heights will vary from gun to gun. It is mostly trial and error and a lot of filing down of the shims.
I had to drill and tap an extra hole in each one of my tangs order to install my 57SML sights.
I will try to add pictures. IMG_6880.jpegIMG_6879.jpegIMG_6878.jpegIMG_6876.jpeg
 
Last edited:
Early ones had the 3 hole for tc hunter peep but the Willis and lyman fit it great also
 
Back
Top