• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

WANTED WTB .58 Zouve barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jun 5, 2020
Messages
37
Reaction score
32
Location
Billings Montana
I have a used Sears Zouve 58 cal rifle that I saved from compete destruction. It was an evidence gun for many years. They de-milled the rifle and sold the parts off as a lot. The de-mill process consisted of them cutting the bore, breech plug, and tang off of the barrel. So I have a barrel stub of about 30 inches or so. Looking to either replace the barrel or maybe getting a breech plug with tang attached so I can get the barrel machined and timed for new plug/tang combo. I think it'd be easier to just buy a drop-in barrel replacement. Oh and the mainspring in the lock broke as well.

Below is the kit I bought for pictures

https://everygunpart.com/long-guns-kits/sears-zouave-other-zlu3iv-awh2-00.html
 
Back
Top