• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

What's This?

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ray-Vigo

Yankee
Joined
Jul 5, 2009
Messages
558
Reaction score
144
Location
New England
A friend asked me about this cannon today. It almost looks like a home-made thing to me-- pretty strange looking.

can1_zpsozjiw4mg.jpg


can3_zpsn0js0lyj.jpg


can2_zpse9eq6xw6.jpg
 
Yep! looks homemade to me.....Wheels look like they cane off an early 20th century piece of farm machinery and the barrel reminds me of a 15th century bombard.
 
I think I'd clean it real well....fill the cracks in the wood with epoxy......Load it up, light the fuse ..................................and run like hell......but I'd shoot it....unless you see something I don't.

Did I mention a long fuse and running?..... :wink:
 
Certainly appears to be something that was cobbled together in someone's shop in the early 20th century. :idunno: Since it lacks any means of sighting or adjusting elevation, :hmm: I'd say it was something made for just making noise.
 
Whats with the massive metal aft of the vent? If it is a single casting I estimate the diameter to be 3X the bore at the breech ????
 
I would guess (and it IS just a guess) that whoever built the cannon started out with a used piece of some sort of machinery to make their "creation".

yours, satx
 
The barrel does look like it could have once been an axle for some VERY large flywheel or water wheel, the large diameter being where the flywheel or water wheel was pressed on.

The flange at the rear could have positioned it in the bearing blocks.

It also looks like something a High School or College might fire after a touchdown was scored. :hmm:
 
Billnpatti said:
Certainly appears to be something that was cobbled together in someone's shop in the early 20th century. :idunno: Since it lacks any means of sighting or adjusting elevation, :hmm: I'd say it was something made for just making noise.

Judging from the nuts and bolts, that would be my guess also. A noise maker/signal gun. Not intended to fire a projectile. Use blanks only, no projectiles.
 
Back
Top