• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Trigger lightening suggestions

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tom A Hawk

Cannon
MLF Sponsor
MLF Supporter
Joined
Jul 6, 2006
Messages
6,649
Reaction score
15,253
Location
Finger Lakes Region - NYS
The trigger on my Isaac Haines is really not all that bad. It has a crisp release and no take up slack. Its just not quite as light as I would prefer nor as good as a previous build. I had thinned the sear return spring on initial assembly and that is not the cause. Un-cocked the trigger pull is quite nice. However, at full cock its a bit stiff. My suspicion is the placement of the trigger bar on the sear arm is not quite optimal. But what to do about it now after assembly is the question.

Any suggestion from you more experience builders would be appreciated.

1663977611151.jpeg
 

Latest posts

Back
Top