Dumb question of the day: In final steps of finishing a Kibler. Cut the Tried and True finish with turpentine for first few coats. Is it advisable to continue with the thinning with turpentine or just continue with the Tried and True only?
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Tried and True finish
- Thread starter Frod733
- Start date
Help Support Muzzleloading Forum:
I would only thin the first coat - maybe two coats and then use full strength. Rub it in well and wipe off eexcess per instructions. Works great.
Col. Batguano
75 Cal.
- Joined
- Feb 10, 2011
- Messages
- 5,034
- Reaction score
- 1,406
It's a finish that can take a long time to dry, so ultra thin coats are necessity. The good news is that you're doing it at a time of year that the wait shouldn't be too long. I did it in August & September when the humidity was >50% and some of the coats took more than a week. Thinning it would certainly help as well, but remember that 50% thinning means you'll need more coats.
Why don't you try it both ways and adjust as necessary. But no matter what, give it at least a day between coats. remember, if the coat you're covering isn't fully dry the volatiles in that undercoat are going to have to make their way to the surface through the new one, and if that's gotten something of a "skin" on it, the bottom coat will have just that much more trouble. You just can't rush nature.
That's why it's often a good idea to leave some work for yourself (like engraving and metal finishing) to give yourself something to do while nature is doing its' work.
Why don't you try it both ways and adjust as necessary. But no matter what, give it at least a day between coats. remember, if the coat you're covering isn't fully dry the volatiles in that undercoat are going to have to make their way to the surface through the new one, and if that's gotten something of a "skin" on it, the bottom coat will have just that much more trouble. You just can't rush nature.
That's why it's often a good idea to leave some work for yourself (like engraving and metal finishing) to give yourself something to do while nature is doing its' work.
Similar threads
