• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

SOLD Tomahawk for sale SPF

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Jan 28, 2022
Messages
92
Reaction score
135
I have a tomahawk for sale.
Purchased from the Long Cabin Shop many years ago. Alloy ( 4140?) steel. Takes a good edge. Good throwing hawk.
Supposed copy of a French type hawk.
Asking $75.00 shipped to the lower 48.
 

Attachments

  • IMG_20221106_091626832.jpg
    IMG_20221106_091626832.jpg
    2.3 MB · Views: 2
  • IMG_20221106_091637801_HDR.jpg
    IMG_20221106_091637801_HDR.jpg
    2.4 MB · Views: 0
  • IMG_20221106_091659105_HDR.jpg
    IMG_20221106_091659105_HDR.jpg
    2.2 MB · Views: 0
  • IMG_20221106_091736407.jpg
    IMG_20221106_091736407.jpg
    2.4 MB · Views: 0
  • IMG_20221106_091616138_HDR.jpg
    IMG_20221106_091616138_HDR.jpg
    2 MB · Views: 0
Interested. Do you have a picture of the top of the head? Where the wedge is?
As promised, here are pics of the top and bottom of the head. You should be able to see the bottom of the head is very snug to the haft.
There was only a little play in the fit before I added the shim.
I'm certain that a soaking in coal oil would have remedied the issue.
As well as pouring the small cavity with pewter.
I took the easy way out. Wooden shim and filled with beeswax.
 

Attachments

  • IMG_20221114_083147982.jpg
    IMG_20221114_083147982.jpg
    1.4 MB · Views: 0
  • IMG_20221114_083145946.jpg
    IMG_20221114_083145946.jpg
    1.4 MB · Views: 0
  • IMG_20221114_083132174.jpg
    IMG_20221114_083132174.jpg
    2.1 MB · Views: 0
  • IMG_20221114_083059267.jpg
    IMG_20221114_083059267.jpg
    1.3 MB · Views: 0
When you install the handle, was the shaft dropped into the eye or the head placed on handle ?
By design, handles must be started from the top down.
Small end of handle thru the top of the eye first.
That's the only way to fit one.
 
Status
Not open for further replies.

Latest posts

Back
Top