- Joined
- Oct 25, 2020
- Messages
- 3,365
- Reaction score
- 1,237
Looking for a stock with hardware to fit Hawkens barrel I've acquired.
-
If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
WANTED TC Hawken stock
- Thread starter kelljp
- Start date
Help Support Muzzleloading Forum:
Old Hawkeye
50 Cal.
- Joined
- Mar 14, 2020
- Messages
- 1,074
- Reaction score
- 1,932
Be aware that any of the older Investarm "Hawken" stocks with a single wedge will work for your TC barrel if it's 15/16". Some minor fitting around the wedge lug & drum/lock area "may" be needed, but quite easily done.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,343
Usually only takes a couple file strokes on each side of the hook where it fits into the tang.
Do you need the lock as well?
- Joined
- Oct 25, 2020
- Messages
- 3,365
- Reaction score
- 1,237
Was wanting lock also, but would consider stock only.
Similar threads
- Locked
