Intervention
32 Cal
Not sure if that's what this is, I can't find anything for sure.
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
TC Hawken - Is this the breech cleanout screw?
- Thread starter Intervention
- Start date
Help Support Muzzleloading Forum:
It’s for mounting a sight. Have never actually seen it used.
bubba.50
Barefoot Hillbilly
- Joined
- Aug 21, 2010
- Messages
- 3,837
- Reaction score
- 3,343
No. That hole is for the rear of a TC scope mount. The other end mounted to the rear sight holes.
The so-called ‘clean-out screw’ was actually just a byproduct of the flash channel in the manufacturing process. So many people boogered them up in their needless desire to remove them that they starting drilling the flash channel from the back side of the breech plug and plugging it solid. Sometimes you can see a small circle left over from the process.
The so-called ‘clean-out screw’ was actually just a byproduct of the flash channel in the manufacturing process. So many people boogered them up in their needless desire to remove them that they starting drilling the flash channel from the back side of the breech plug and plugging it solid. Sometimes you can see a small circle left over from the process.
