I'm looking for a .45 caliber barrel.
It CAN be:
From any decent maker.
Used, just as long as the bore isn't pitted or bent. Is the outside rusty or pitty? No worries!
Already drilled/tapped/dovetailed from a previous build. That's fine with me!
*.40 caliber also considered*
*PRB twist preferred.*
It HAS to be:
13/16" across the flats.
STRAIGHT octagonal
At least 40" long.
5/8 x 18 traditional breech.
At least .010" deep grooves
If you feel like you've got something that would work, please feel free to PM me.
It CAN be:
From any decent maker.
Used, just as long as the bore isn't pitted or bent. Is the outside rusty or pitty? No worries!
Already drilled/tapped/dovetailed from a previous build. That's fine with me!
*.40 caliber also considered*
*PRB twist preferred.*
It HAS to be:
13/16" across the flats.
STRAIGHT octagonal
At least 40" long.
5/8 x 18 traditional breech.
At least .010" deep grooves
If you feel like you've got something that would work, please feel free to PM me.
