• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

SOLD SOLD Ed Rayl 31 Caliber Swamped barrel (flint)

Muzzleloading Forum

Help Support Muzzleloading Forum:

Status
Not open for further replies.

WVAED

40 Cal.
Joined
Nov 29, 2011
Messages
375
Reaction score
28
This barrel was made by Ed Rayl (A West Virginia barrel maker). It was breeched already. It has the tendons cut for the underneath lugs (mounting lugs included). The upper tendons are cut, I am including a rear buckhorn sight to send along too. The work was already done on the barrel when I bought it. It is a 31 caliber barrel. I am unsure of the twist. It has a lightning liner already installed (see pictures) The barrel is 35 1/2 inches long. My hope was to build a little squirrel rifle. 225.00 shipped.
1660302755205.jpeg
1660302775878.jpeg
1660302936115.jpeg
1660302801720.jpeg
 

WVAED

40 Cal.
Joined
Nov 29, 2011
Messages
375
Reaction score
28
I am at work right now. I will measure those when i get home later today. Thanks
 

WVAED

40 Cal.
Joined
Nov 29, 2011
Messages
375
Reaction score
28
The breech is about 7/8 and the muzzle is almost 13/16. That is me measuring with a tape measure, but close as I could get.
 

WVAED

40 Cal.
Joined
Nov 29, 2011
Messages
375
Reaction score
28
The barrel appears to be swamped. What are the breech and muzzle dimensions across the flats?
The breech is about 7/8 and the muzzle is almost 13/16. That is me measuring with a tape measure, but close as I could get.
 
Status
Not open for further replies.
Top