eggwelder
40 Cal.
- Joined
- May 26, 2015
- Messages
- 936
- Reaction score
- 338
finally got round ball for my .58. Mold is .563, so a little small, but fits my trade gun too. Grease patch over 60 gr put the ball almost 18 inches high at 60 yds. as far as i could tell. i ended up doubling the patch and dropped the powder to 40 gr, and it was still high, about 10 inches. all the hits were in a vertical string so i know i`m on as far as that goes- i set up a scrap piece of wood behind the target just to see if i was overshooting.
i think i will need a taller target to see how high the balls are hitting next time i go out. And find thicker patching.
side note- anyone got about ten .570 balls they can part with?
i can max out at the gravel pit i shoot at at about 85 yards
i think i will need a taller target to see how high the balls are hitting next time i go out. And find thicker patching.
side note- anyone got about ten .570 balls they can part with?
i can max out at the gravel pit i shoot at at about 85 yards