Renegade sights?

[longcruise]

I have a problem with the sights on both of my Renegades. The stocks both seem to be designed for scopes, IMO. My permanent fix will be restocking in a Pecatonica blank, but that's a next year proposition.

So, my short term solution will be to put taller front and rear sights on. I'll probably have to make them but thought I'd take a shot at inquiring if anyone knows of a go to sight setup that would work?

 

[FishDFly]

Seems this was posted in the last day or so, do a search it may help you.

 

[SDSmlf]

There are posts on the forum where some describe how they lowered the comb on their TCs. Not that difficult, but obviously would require a stock refinishing.

 

[Bad Karma]

I have a problem with the sights on both of my Renegades. The stocks both seem to be designed for scopes, IMO. My permanent fix will be restocking in a Pecatonica blank, but that's a next year proposition.

So, my short term solution will be to put taller front and rear sights on. I'll probably have to make them but thought I'd take a shot at inquiring if anyone knows of a go to sight setup that would work?

I’m using a Lyman Globe with a Lyman 57 peep rear and it’s working very well for me.

 

[longcruise]

I don't want to go too deep into the $$$ over this since sometime next winter or spring I'm going to set this up into a Pecatonica stock. For now, I guess I'll just get the files out and start making something.

Thanks for all the recommendations.

 

[necchi]

This ones bigger, and works.
https://www.trackofthewolf.com/Categories/PartDetail.aspx/874/3/FS-FG-39-I
If the Renegade stock doesn't fit you well with shoulder, neck and cheek,, You might find a Hawken better suited to your body build and frame.
Honest,,

 

[Sparkitoff]

XS will make a post from sight up to .50 inch tall. You can order a plastic test post. Shoot and trim the plastic as necessary until you get the right height.

 

[OldSmoky1967]

I’m using a Lyman Globe with a Lyman 57 peep rear and it’s working very well for me.

I use a Lyman peep sight and a globe front sight, too. Tack driver!!!

 

[Bad Karma]

I use a Lyman peep sight and a globe front sight, too. Tack driver!!!

It certainly helps! I also have a couple insert cards, one from Browning which was originally for a highwall and another from Lee Shaver. Those fine inserts along with appropriately sized targets make a huge difference for me. Night and day compared with the stock Lyman inserts.