• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Plain maple Colonial first shots

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Plain maple; just a piece of wood with diagonal cross-grain through the wrist. The crack ran through the lock recess and diagonal back towards the opposite side, but it wasn't a complete break.

I opened the crack enough to run in some Titebond, and used compressed air to blast the glue all the way through the crack. I used the lock to line up the open side of the crack, then clamped it with surgical tubing. When I got back to it a couple days later I scraped the squeeze-out. By the time it is sanded again the repair won't be visible.

I'm pretty sure it won't break again at that point, but the grain suggests a few places where similar fractures could occur. I'm undecided on installing a rod in the wrist or other further repairs.
It's fancy maple. With iron nitrate , I let it set for about 25 minutes than heated until it turns orange.
2 coats of Tried and True. Than about 10 coats of spray shellac.
And final sanding with 2400 grit micro mesh pad.
 
Back
Top