1dogdown
40 Cal
Looking for the correct size ball and patch for this pistol.It is an older model.Was thinking .430 and a .010 patch?
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Pendersoli 44 Kentucky ball size
- Thread starter 1dogdown
- Start date
Help Support Muzzleloading Forum:
If it is actually a .44 caliber gun then you are right. Although they don't offer a .430 diameter ball, Track of the Wolf has .433 diameter balls that should work well.
That is the size I used in my .44 caliber Kentuckian rifle.
Being a pistol, I do not recommend using a thick patch. In the rifle areas you will see people using patches that are .018 to .020 thick.
Usually a .010 thick patch works very nicely in single shot muzzleloading pistols. That's because pistols only use about half of what a rifle does for a powder charge so they don't need thick patches to seal them. The thinner patch will also make loading the gun much, much easier.
That is the size I used in my .44 caliber Kentuckian rifle.
Being a pistol, I do not recommend using a thick patch. In the rifle areas you will see people using patches that are .018 to .020 thick.
Usually a .010 thick patch works very nicely in single shot muzzleloading pistols. That's because pistols only use about half of what a rifle does for a powder charge so they don't need thick patches to seal them. The thinner patch will also make loading the gun much, much easier.
Stony Broke
32 Cal.
- Joined
- Jan 9, 2014
- Messages
- 819
- Reaction score
- 763
I have a Pedersoli 44, and the .433's made by Hornady do just fine in it.
1dogdown
40 Cal
With the .010 patch correct?
Stony Broke
32 Cal.
- Joined
- Jan 9, 2014
- Messages
- 819
- Reaction score
- 763
The patches I use are a little over the .010's....so they fit a little tighter, but they work fine and it's very accurate with the combo.
Similar threads
- Locked
