This tip may be helpful if you have a patch stuck in your gun & you have no puller:
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Patch Puller idea to try........
- Thread starter B P Maniac Shooter
- Start date
Help Support Muzzleloading Forum:
rafterob
62 Cal.
So, rather than ruin a perfectly good bore brush. Create a corkscrew out of a length of coat hanger wire (or similar stout wire). Make the corkscrew about 3 inches long. Now screw that cork screw onto that bore brush (if you get the twist of the corkscrew correct, it will wind around the shaft of the brush and not cut through the bristles). Now run that down the barrel and retrieve your patch.
