• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Patch Knife (Reduced Again)

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 5, 2021
Messages
1,090
Reaction score
1,281
Location
SE PA
Patch knife with 3-inch blade, antler handle, and 6.5-inches overall length. Tang is about 1/2 length of the handle and is pinned.

I was told this is a handmade knife, but no information on the maker. Includes matching sheath and 4 rolls of pillow ticking.

Offered for $80 $49 shipped in the lower 48 US. PM for details.
 

Attachments

  • PXL_20220603_210534785.jpg
    PXL_20220603_210534785.jpg
    158.2 KB · Views: 4
  • PXL_20220603_210553506.jpg
    PXL_20220603_210553506.jpg
    201.7 KB · Views: 0
  • PXL_20220603_210600634.MP.jpg
    PXL_20220603_210600634.MP.jpg
    199.2 KB · Views: 0
  • PXL_20220603_210609591.jpg
    PXL_20220603_210609591.jpg
    193.6 KB · Views: 0
  • PXL_20220603_210621387.jpg
    PXL_20220603_210621387.jpg
    195.8 KB · Views: 0
  • PXL_20220603_210736511.jpg
    PXL_20220603_210736511.jpg
    183.2 KB · Views: 0
  • PXL_20220603_210824008.jpg
    PXL_20220603_210824008.jpg
    226.4 KB · Views: 0
Last edited:
If I had to guess, it looks like an Old Hickory paring knife blade that someone has put in an antler handle. If so, USA made, 1095 carbon steel. Nicely done!
 
Status
Not open for further replies.
Back
Top