-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
No 10 nipples in place of 11?
- Thread starter montanas
- Start date
Help Support Muzzleloading Forum:
Not that I know of.
It's the over-all length and orifice size that's the variable for the 6mm x .75mm that makes the difference in the factory made #10 nipples.
All the 6x75 nipples made for #10's are too short for the GPR and other rifles,,
You could make one to try(?). Take a common 6 x 75 nipple and chuck it in a drill,, run a file against it till a #10 cap fit's,,
It's the over-all length and orifice size that's the variable for the 6mm x .75mm that makes the difference in the factory made #10 nipples.
All the 6x75 nipples made for #10's are too short for the GPR and other rifles,,
You could make one to try(?). Take a common 6 x 75 nipple and chuck it in a drill,, run a file against it till a #10 cap fit's,,
Eutycus
Cannon
Could you describe "orfice" size a little more.
