• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Need help with Just purchased pistol

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 15, 2020
Messages
86
Reaction score
114
Just purchased this and it has no markings. Help appreciated.
 

Attachments

  • 16446126464147486541341917226347.jpg
    16446126464147486541341917226347.jpg
    92.3 KB · Views: 97
  • 16446126729623955304151463785804.jpg
    16446126729623955304151463785804.jpg
    104.2 KB · Views: 98
  • 16446127143966469634308695678126.jpg
    16446127143966469634308695678126.jpg
    92.6 KB · Views: 103
  • 16446127394169221252079860374853.jpg
    16446127394169221252079860374853.jpg
    66.1 KB · Views: 99
I'll try a few more.
 

Attachments

  • 16446137615086505302359151550897.jpg
    16446137615086505302359151550897.jpg
    136.3 KB · Views: 89
  • 16446139581092113931550343293109.jpg
    16446139581092113931550343293109.jpg
    102.6 KB · Views: 92
  • 16446139764786943760576909580578.jpg
    16446139764786943760576909580578.jpg
    167.2 KB · Views: 89
Check the inside of the lock plate & the barrel bottom with the stock removed for any ID marks.
 
...if someone could identify it. I was also curious about who made the lock?

I think that is a small siler lock, made by jim chambers and listed on most gunmakers supply sites for about $175.

It's installation requires a mortice, meaning someone took the time to detail out a mortice in your gun's stock in order for it to mate with the lock. The barrel was obtained and installed in a similar manner. The reason there are no markings is because this gun was assembled by someone who ordered the parts he needed and built the gun himself and didn't leave any markings upon finishing.

You have a good pistol right there...
 
I think R.E. Davis used to assemble Siler locks for sale, so it could be a "Davis/Siler" lock. I believe most of the Davis locks were made from castings obtained from the Mould & Gun Shop, but I seem to recall some Silers in the R.E. Davis product line years ago, also.

I think Mr. Davis wanted to assemble the locks to his own standards, which were pretty high. There were other people assembling locks from Siler parts sets who were not doing such a good job... one in particular comes to mind... but the locks by Davis were well regarded.

Best regards,

Notchy Bob
 
Back
Top