• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

My first flintlock is completed

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Very nice first build. The Kibler kit really does a nice job of keeping the dimensions and ratios in perspective, helping you avoid a lot of architectural mistakes doesn't it?

Do you have your next build picked out yet, or its' timing?

If you are planning on another build (particularly if you are going to go from a blank) keeping this one close at hand will give you lots of guidance. The areas that need lots and lots of thought are the transition zones. From upper forearm to lower, from lower forearm to lock area, lock area to wrist etc. If they're done well your eye will gently "glide from one area to another". If not, your eye fixes on the transition itself.
 
Very nice first build. The Kibler kit really does a nice job of keeping the dimensions and ratios in perspective, helping you avoid a lot of architectural mistakes doesn't it?

Do you have your next build picked out yet, or its' timing?

If you are planning on another build (particularly if you are going to go from a blank) keeping this one close at hand will give you lots of guidance. The areas that need lots and lots of thought are the transition zones. From upper forearm to lower, from lower forearm to lock area, lock area to wrist etc. If they're done well your eye will gently "glide from one area to another". If not, your eye fixes on the transition itself.
Thank you for the wisdom and advice. I haven't planned another build yet but it will probably be another kit. I am not ready for a blank build. Also thank you for the kind words about my SMR build.
 
I received my SMR kit in February 2022. After opening the box, I saw the quality and precision of the kit. I knew immediately this rifle was well designed and that only the slightest fitting of parts was necessary. Being my first flintlock and having little knowledge and even less understanding of its operation and design, I began a deliberately slow build, reading, studying, asking questions over forums, and learning as I progressed, making mistakes, stopping the build while learning how to correct them. I set the last pin on Monday evening, September 19, 2022, and tightened the last screw. I applied Briwax Tuesday afternoon, September 20, 2022. Some of you have provided encouragement and direction along the way. You have no idea how indebted I am to you. Attached are pictures of the finished Kibler SMR in .32 caliber. You will see flaws, I’m sure. But that’s okay because the builder has plenty of them also. Comments are encouraged. Now I will learn how to enjoy and safely and accurately shoot it!

Kibler fancy maple stock
Iron Nitrate stain
Permalyn sealer finish
Jax black metal finish rubbed back for aging
Light brown Briwax for protection
Great work on a top-notch project! Kudos!
 
Back
Top