• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Left hand Bucks County

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 2, 2012
Messages
40
Reaction score
125
-$200.00 plus shipping
-Red Maple Pre-carved stock
-left hand inlet for Siler or larger lock
- tight curl full length
- accepts up to 42” D weight barrel
Swamped octagon
- butt pre inlet “Dubbs “ style plate
( generally 13 3/4 “ pull ) + or -

1445F6A7-D25D-48B3-AA5F-3177B29C6C79.jpeg


1445F6A7-D25D-48B3-AA5F-3177B29C6C79.jpeg
986F72E4-F3BD-4C08-929D-DD103CDF2577.jpeg
 

Attachments

  • B3380525-A48A-4F7B-948C-00FE63FE3A99.jpeg
    B3380525-A48A-4F7B-948C-00FE63FE3A99.jpeg
    90.4 KB · Views: 17
  • 90A73592-2B0C-40EA-A9CF-B89EBE3E6702.jpeg
    90A73592-2B0C-40EA-A9CF-B89EBE3E6702.jpeg
    92.3 KB · Views: 18
  • 1594EBDB-464A-42F4-BAD8-B8FC35784564.jpeg
    1594EBDB-464A-42F4-BAD8-B8FC35784564.jpeg
    87.9 KB · Views: 19
  • 0AAFE41F-94F4-4814-A0CA-8EB3FD632035.jpeg
    0AAFE41F-94F4-4814-A0CA-8EB3FD632035.jpeg
    92.4 KB · Views: 17
Last edited:

Attachments

  • 9F7C29A7-0C2B-499D-9E08-83A073AF306C.jpeg
    9F7C29A7-0C2B-499D-9E08-83A073AF306C.jpeg
    73.5 KB · Views: 31
  • 7FD937EB-6908-4841-8EC5-5080D2D5CA70.jpeg
    7FD937EB-6908-4841-8EC5-5080D2D5CA70.jpeg
    147.9 KB · Views: 39
  • 3B2084CA-FE81-490E-942E-18540B116239.jpeg
    3B2084CA-FE81-490E-942E-18540B116239.jpeg
    88.9 KB · Views: 35
Caleb:

If you made the gun in the pictures above, perhaps you should offer to make me a lefty hand Bucks County with that stock!!!

ADK Bigfoot
 
Bigfoot,

I did build the rifle in the pics. It was a D weight .62 swamped octagon. Others have been .62 smoothbore, octagon to round.
 

Attachments

  • 0D59E639-F484-4247-BE3E-07F58C794832.jpeg
    0D59E639-F484-4247-BE3E-07F58C794832.jpeg
    207.3 KB · Views: 19
Thanks for being a gentleman Flint62.

To be fair, my PM to Caleb wasn't an "I'll take it," but rather three questions that, contingent upon his answers would likely result in my purchase of the stock. I haven't built a rifle yet, so I need to know if I can do it with general shop tools (and not gunsmithing equipment that I likely do not own.)

Since I'm not sure of the expectations of this forum, I'll defer to the collective wisdom of this group for what's fair. Regardless, it would appear that Caleb has a buyer.

Best,

KP
 
I've seen your emails and replied. One last question, if you don't mind and then we can move this along.

Thx,

KP
 
Status
Not open for further replies.

Latest posts

Back
Top