• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

TRADE Lee .311 round ball mould

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Leadriver

40 Cal
Joined
Oct 11, 2021
Messages
199
Reaction score
104
I have 9mm RN and 38 SWC powder coated lead bullets for trade.
38SWC weights 160gr with .358dia
9mmRN weights approx 126gr with .356dia.
All bullets should be sized and ready to load, however please run thru a sizing die to make sure I didn’t miss any. I have quite a few of both these. I want to trade for a .311 round ball mould.
 

Attachments

  • 5802CD9D-D505-4A56-9657-0356A60813BE.jpeg
    5802CD9D-D505-4A56-9657-0356A60813BE.jpeg
    697.1 KB · Views: 2
OK so these are modern bullets..., and if they were jacketed, then they would not be allowed. However, they are coated lead, and a) could be loaded into a .36 caliber traditional rifle, or the .356 might even be paper patched and loaded into a .36 caliber traditional rifle, and b) they could be re-melted and recast into round ball. The trader is asking for a trade for a round ball mold, so..., this ad will likely remain. @Meriwether might overrule me.

LD
 
Back
Top