• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

WITHDRAWN Kibler SMR, 32 Cal

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
May 1, 2024
Messages
14
Reaction score
15
Location
Wrentham, MA
Extra fancy maple, 32 caliber, all browned furniture, iron nitrate stain. 5 hand rubbed coats of oil finish. Toe plate added. Shoots beautifully. A total of 10 rounds have been fired from it. Just completed.
UPS money order or Zelle prefered. Cashier's check as well would be acceptable.
$1800 shipped in original Kibler crate.
PM me for any additional info you need.
 

Attachments

  • SMR 2.jpg
    SMR 2.jpg
    1.7 MB · Views: 6
  • SMR 1.jpg
    SMR 1.jpg
    789.4 KB · Views: 0
  • SMR 3.jpg
    SMR 3.jpg
    1.6 MB · Views: 0
  • SMR 4.jpg
    SMR 4.jpg
    1.5 MB · Views: 0
  • SMR 5.jpg
    SMR 5.jpg
    1.6 MB · Views: 0
  • SMR 6.jpg
    SMR 6.jpg
    1.7 MB · Views: 0
  • SMR 7.jpg
    SMR 7.jpg
    1.3 MB · Views: 0
  • SMR 8.jpg
    SMR 8.jpg
    1.3 MB · Views: 0
  • SMR 9.jpg
    SMR 9.jpg
    1.3 MB · Views: 0
yes
Kibler's specification:
  • Styling from the 1820s based on the work of Whitson in western North Carolina
  • Stock has a pull of about 13.75” and a drop of approximately 3 5/8” and no cast off
  • Buttplate is approximately 1.375” in width and 4.5” in height.
  • Iron mounted
  • 44” custom profiled barrels. Breech .938” and waist approximately .700”. A very nice contoured barrel. It comes standard in square bottom rifling.
  • Kibler's CNC Ketland Flintlock
  • Kibler's CNC machined double set triggers.
 
yea, and joe biden has an IQ above room temperature,,,,,,,,,,,,,,,,,,
Sorry to upset you. Full disclosure out of the five muzzleloaders I own none have a blade front sight. I will say that I have heard, the long slope of the front sight will reflect sunlight and is easier to pick it up, if you will. That’s the only reason I believe it’s on correctly. Could it be it doesn’t matter?
 
sorry, i was just asking why it was on wrong, and it is. but good Lord put it any way you like it is your gun. the new owner can change it or whatever they want, i actually like the gun, and it is a great price on it also! i think someone will get a good deal,,,,,,,,,,,,,,,,,,
 
Status
Not open for further replies.
Back
Top