Pacecars
32 Cal
What items other than the kit will I need to finish the Kibbler SMR? Tools and finishing supplies?
-
This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.
Sign up here: https://www.muzzleloadingforum.com/account/upgrades -
Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.
We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.
Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103
Items to build a Kibbler SMR kit
- Thread starter Pacecars
- Start date
Help Support Muzzleloading Forum:
- Joined
- Mar 13, 2020
- Messages
- 6,840
- Reaction score
- 18,846
- Location
- On the Border in Idaho looking at BC
sharp chisels, sand paper, drill and bits, possibly a scraper, and whatever finish you desire.
- Joined
- Aug 27, 2004
- Messages
- 2,986
- Reaction score
- 6,381
If you do not know that answer at this point I suggest you get the kit in front of you and visually look at what you need to do. When you can see the work ahead, you will understand a screw driver here, a vice there, sandpaper, files, good lighting etc. If you don't have a shop set up, just wait until you see what you need. Buying items that will not help assemble is a waste of money, unless you want them for other projects.
Larry
Pacecars
32 Cal
It has been about 40 years since I put together a Lyman Great Plains Rifle so I am a little rusty. I do have a manure load of tools and a gun vise and some chisels.
Similar threads
