• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Investarms - Hawken 50 part needed

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Intervention

32 Cal
Joined
Jul 24, 2020
Messages
43
Reaction score
21
Location
Los Angeles
Hello, I am building an Investarms Hawken 50 and I am missing the pin that goes on the front of the rear sight. Does anyone know the size of the pin I would need to order?
Thank you.
IMG_2062.jpeg


IMG_2063.jpeg
 
Last edited by a moderator:
Being somewhat of a red neck I would (myself) take it the hardware store and find a cotter pin that was snug enough (after I used a whittled down piece of match stick "to get by" for a few seasons.
 
If you have a small drill bit set find the drill that just fits (@mooman76 recommendation), then as @bubba.50 suggests, find a nail that diameter or few thousands larger. You will have your pin. Then you may want to search for a roll pin a bit larger if that floats your boat.
 
Back
Top