• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Flintlocks: How to Shoot Them

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
You eat an elephant one bite at a time.
Every thing is a simple problem, should you learn it. I saw a a man get a colostomy put in. The doc cut open the belly, pulled the guts out in to a pile, found the spot, cut out bad gut, sewed end to belly wall, plopped guts back in the belly sewed it shut.
I thought ‘I’ve done this to deer, no biggie’.
But it took the doc a bit of time to learn how to do it.
Shooting a flinter is a learned skill, shooting any ml is. Should any of us flinter shooters pick up a match lock I think we would be instant experts, but would face a bit of a learning curve. A modern shooter has to learn a cap gun. A cap shooter has to learn a flinter.
Any one can learn it in an afternoon, but like any thing new it can be intimidating

Strangely enough, this is not the image I would have thought of when considering taking up shooting flintlocks... ;^)
 
It isn't rocket science

That is the problem, many have a habit of making things complicated. Helps if a knowledgeable shooter is close, but, a little self study and learn the numbers; the rest will come as time passes. Goof ups, sure, bound to happen, just remember to be safe and things will work out.
One of the reasons I quit attending NRA matches was everyone got so scientific, and be damned if you even looked at their weapon. I mean just look, not touch.
 
There has been more studies on flintlocks and shooting them since Paul wrote that article. Some of his statements should be altered, but more by nuance than refuting Paul's statements.

Thanks to timed studies by Larry Pletcher, we know that the time for a flintlock to fire the man charge IS slower than a percussion lock. Most people couldn't tell as it takes very precise timing measurements and the difference is in thousandths of a second. Some of us think we can tell the difference. Use a sharp flint, keep the pan and frizzen clean, keep the flint tight in the jaws, and hold on target until the smoke clears. Follow through the shot.

A layer of priming powder in the pan is best placed along the bottom of the pan and just below the touch hole.

An internally coned touch hole speeds up ignition of the main charge.

Yes, we do miss Paul.
Wow - very good advice!
 
Wrap your flints with lead
Voids Jim Chamber's warranty, I Know. It does work better than leather, but....
Never have tried loose packing the ball onto the powder. Gonna try this and see if it changes anything.
Never have picked my load either. Never had a failure yet. Guess more things to try.
 
I found this very interesting article and learned a lot being new to flintlocks and thought it might help other old beginners like me.

Flintlocks: How to Shoot Them
By Paul Vallandigham


Sadly, there is such a lack of information about how to shoot traditional
muzzleloading guns, both flintlocks and percussion guns, that the consumer
is left with whatever is the newest fad, and whatever the clerk at the
local Wal-Mart doesn't know about guns. Cap and ball guns are close enough
to cartridge guns, and even to the in-line actions, that clerks can't
steer you too far wrong if you choose to buy a modern rifle or double-barreled
percussion shotgun.
But, put a flintlock on the shelf and no one knows how to make it go
bang, beyond that you have to put this rock in the cock (hammer), and
hope it sparks, and hope the sparks hit the powder in the priming pan,
and then hope the main charge in the barrel is ignited. It all sounds
like so much hard work that consumers just don't want the guns anymore.
With the new in-line actions, you use #209 shotgun primers, the same
as used to reload modern shotgun shells. You use black powder substitutes
like Triple Se7en and Pyrodex, and sometimes this comes in pre-measured
pellets, so you don't have to measure any powder! Then we have plastic
wads instead of cloth, and jacketed pistol bullets instead of round lead
balls.
Because everything
goes down the muzzle, we (properly) call them muzzleloaders, and pretend
we are doing things the way Daniel Boone and Davie Crockett, or the
men on the Lewis & Clark Expedition did it 200 years ago.
Add to that bad legislation passed by Congress to give us a little more
false security, which restricts how black powder is sold transported
and stored, and even finding a store that carries black powder is a chore.
Finding Flints? Where do you start to look? If you live on the West coast,
you are a long way from Friendship, and even Arizona, where the NMLRA
holds it winter matches and all the products you need are available,
just like at mountain rendezvous in the 1820's.
A myth has been spread by lazy, uneducated gun store clerks, and accepted
by the public, that flintlocks are hard to get to fire, are slow to fire,
and just can't be as accurate as a modern rifle shooting jacketed bullets
in front of smokeless powder. You will even hear that flintlocks are
slower firing than side action percussion guns.
Another problem that has become all too common is kind of a reverse
snobbery among some flintlock shooters, who disdain anyone who doesn't
shoot a rocklock, and don't want to teach people how its done. Some fear
the competition they will have at the rifle matches, and don't want to
give away any secrets to protect their edge--as if they are winning thousands
of dollars in prize money at any rifle match held today! They pretend
to be great shooters, who know all there is to know about flintlocks,
when they usually are just mimicking something they saw their fathers
or grandfathers do, and haven't a clue as to why it is done. The literature
on shooting a flintlock is also lacking, so it is no wonder that young
shooters have trouble finding information.
MYTHS DISPELLED
Flintlocks are actually faster to fire than a percussion gun, all things
being equal. By that I mean, if you have two side lock actions, one flint
and other percussion, and the flintlock is tuned properly (has the flint
mounted properly in the cock, has a good frizzen that sparks, the angle
of the cock will throw the sparks into the middle of the priming pan,
and the main charge has been poked with a vent pick to allow more than
one granule of powder to be ignited by the priming charge at one time),
the main charge in a flintlock will be burning before the hammer on the
percussion gun strikes the percussion cap. The priming powder ignites
and in turn ignites the main charge in the barrel before the cock finishes
its stroke and comes to a rest. The percussion gun, by design, has to
strike the cap between the hammer and the nipple to cause ignition, so
the flintlock has to fire sooner. Flintlocks fire quicker, lock time
being equal.
SECRETS
The secret of shooting flintlocks are few, but important. With the current
celebration of the Lewis and Clark Expedition 200 years ago, west coast
shooters are likely to see a lot of flintlocks being fired at ceremonies.
So will people all along the Missouri and Mississippi Rivers from Wood
River Illinois, where the expedition began, to Astoria Oregon, where
it wintered over 1805-6 before returning. When you watch the flintlock
shooters, check to see if they do the following:
1. In a flintlock, you don't pack the powder by ramming the ball down
hard on the powder charge. A flintlock has to burn the powder one granule
at a time, while a percussion cap sends a flame burning or pushing its
way through the powder charge, igniting lots of powder all at once. A
percussion cap actually detonates the powder, much like the primer in
a cartridge does today.
The flintlock was designed to start a fire that quickly ignites all
the powder to create the gases needed to expel the projectile. Load the
ball using a marked ramrod, so that you load to a mark you have made
on the ramrod that represents where the ball just begins to touch the
powder under it. (You can feel and sometime hear a grinding action when
the ball touches the powder). Leave extra air between powder granules,
to speed the burning process in a flintlock. Actually, there is enough
oxygen in the powder itself to provide all the O2 it needs for combustion.
But extra oxygen helps it burn faster. (That is the secret!)
2. A flintlock works
best if your priming pan is wide and shallow, holding the powder over
a wider surface so that regardless of how you set the flint in the
jaws of the cock the sparks will hit priming powder and ignite it.
This may require use of a Dremel tool to grind the sides of the current
locks to widen them, but the effort will pay off with more positive
and faster ignition. There is nothing more conducive to a flinch than
a misfire, or a "flash in the pan."
Polish the surface of the priming pan to a mirror finish so that it
attracts less moisture from the air to foul your prime. A smooth finish
also makes it easier to wipe out residue after the prime has burned,
so that the residue does not attract water.
In humid areas or conditions, use the same powder used in the main charge
to prime your gun. Leave the 4F priming powder for sunny days at the
range. The coarser powder will burn just a tad slower, but that time
is measured in millionths of a second, and you won't hear the difference
or react differently in the interval between the two powders.
I also find that in some guns it helps to bank the powder in the pan
away from the touchhole, so that there is air under and around the touchhole
for the flame to go towards. This helps direct the flame from the prime
into the touchhole and to the main powder charge. Make sure the touchhole
is above the priming pan, and never cover the touchhole with powder.
There are compounds sold that you can mix with your prime to decrease
its affinity for water, but no one with much experience relies on these
compounds in lieu of common sense. When I hunt in the rain, I leave my
priming pan dry, with a feather or toothpick in the touchhole to keep
moisture out of the main charge. I wrap the muzzle with plastic. If you
are trying to be period correct, a leather collar that has been water
proofed using tallow, or some other grease, can be tied over the muzzle.
Animals such as deer and elk move slowly when its raining, if they move
at all, because they are robbed of their sense of hearing by the sound
of all the raindrops hitting branches and leaves around them. That gives
a hunter time to take the feather out of the touchhole, remove the muzzle
cover, prime the pan, cock the hammer, and take an aimed shot while the
quarry is still in sight.
Wipe the underside of the flint with a swipe of your index finger as
you cock the hammer. This removes moisture that may have condensed on
the underside, where you can't see it, and your gun should fire as expected.
It works for me. I killed a wild boar in Eastern Tennessee one Labor
Day weekend when it was about 85 degrees and raining, with my .50 caliber
flintlock rifle. I wore a poncho to keep both my rifle and me dry, my
gun tucked under my arm so that my body could keep moisture out of the
lock. My leather hat with the broad brim kept water out of the priming
pan when I loaded it.
3. Use a vent pick to poke a channel in the main powder charge in the
barrel. This allows room for the flame from the prime to enter the barrel
through the touchhole, and burn several granules of powder simultaneously.
This speeds ignition so much that I have had club members come up to
me while reloading to ask if I am shooting a flintlock or a percussion
gun! When I show them the flint action, they all want to know how I do
that. Now you know.
4. Wrap your flints with lead, not leather. Leather tends to act as
a shock absorber, and the flint will rebound or bounce off the face of
the frizzen just at the time it is cutting into the steel and starting
to shear off bits of steel at the high temperature required to ignite
the priming powder below. Instead, when the flint rebounds, it tears
bits of steel off that are then caught on the edge of the flint. The
second repeat hit will produce a few sparks that may ignite the prime.
Within a few shots there will be usually so much steel clogging the
edge of the flint that it will not throw a spark from the frizzen into
the pan. Misfire! Then you will see the shooter take out his knife, or
a hammer, or some other device, and begin pounding on the front edge
of the flint. He has to knock off enough of the edge to make a new one,
free of the bits of steel that are clogging the edge. That takes at least
20 shots out of a flint, takes time, leads to flinching, and a general
distrust and dislike of flintlocks in general. Finally the shooter buys
another muzzleloader that uses percussion caps or shotgun primers for
ignition! And all because he wrapped the flint in a leather shock absorber
instead of lead.
Lead does not give, or bounce, and it doesn't let a flint bounce when
it hits the frizzen. Lead holds the flint firmly in the jaws of the cock,
and provides weight to drive the flint into the frizzen and down in a
scraping action to cut and throw very hot steel bits into the priming
pan. If the lock is tuned properly, the angle of the cock to the frizzen
will be correct and the flint will not only scrape steel from the frizzen
in one continuous stroke, but will be self-knapping. That is, it will
make a new edge every time the gun is fired. There will be no need to
knap the flint, as it will not clog its edge with steel.
It takes a few shots
for a flint to "set up" in lead, unlike
a leather wrap, so you have to initially check the tension on your cock
screw about every 5 shots, but it will hold the flint firmly once the
lead forms to the smooth surfaces of the flint. About every 30 shots
you will need to check the flint to see where it is throwing the sparks.
You may have to move it forward in the cock, and use a piece of twig
behind the lead wrap to keep the flint wedged in the forward position.
Aren't you glad that Mother Nature provides us with twigs virtually everywhere?
5. Springs. Most modern locks have springs that are out of balance and
are too strong. The result is that they crush expensive flints, and damage
the frizzen unnecessarily, and jar the gun, making it difficult to achieve
consistently tight groups. The frizzen spring should provide such tension
that it takes no more than 3 pounds of weight to open the frizzen.
Use a trigger pull gauge to measure it. Just hook the trigger pull gauge
over the top of the frizzen, and slowly pull in a straight line forward
until the frizzen opens. Another test is take the frizzen spring off,
and put some priming powder in the pan. If the cock is angled correctly
and the flint set properly in the jaws, the flint should cut steel and
fire the prime without the frizzen spring providing resistance.
The mainspring only needs to be about 10 pounds to ensure proper ignition.
Today's locks often require more than 40 pounds of tension to cock them.
Put your rifle or shotgun butt down on your bathroom scale, make a note
of the weight of the rifle on the scale, and then slowly cock the hammer
back to full cock while watching the dial of the scale. Subtract the
original weight of the rifle, and you have the amount of spring tension
measured in pounds.
If your gun is a large musket with a large lock, the spring may be even
heavier than 40 lbs. Those big locks require very expensive flints, and
I have seen men with locks that literally shattered the stone in one
blow. Even in the days of the Brown Bess, paper cartridges came boxed
20 to a package, and with a new flint for the gun. They did not expect
the flints to shoot more than 20 times before being replaced!
Think you are better off with the new in-lines? I doubt it. Modern arms
makers want to protect themselves from product liability lawsuits, so
they sell us guns that are intentionally over-engineered. That means
heavy springs. Can't shoot consistent groups because of the hammer jolt
that shakes the gun when you fire? You will need to do something about
those springs. A competent gunsmith can reduce the tension on the V-springs
found on modern replica flintlock actions. He can remove the rattle and
tickle that destroys accuracy, while still allowing your gun to shoot
each time you pull the trigger and save your flints.
The large rifle flints I use in my American 20 gauge fowler can get
60-80 shots per flint. MY .50 caliber rifle gets about 80-100 shots per
flint using medium sized rifle flints. The large flint I use in my fowler
run about a dollar each at retail, and the smaller rifle flints run between
60 and 75 cents each. That means it costs me about .0125 cents for each
shot fired in my fowler, cheaper than the cost of shotgun primers, and
about .0075 cents every time I fire my .50 cal. rifle. That is cheaper
than large rifle primers.
6. For the past 60 years or more we have been stuck with the idea that
the cloth patch we use with a round ball performs two functions: it grabs
the ball and imparts the spin of the rifling to the ball as it travels
down the barrel, and it seals the bore so that gases behind the ball
cannot cut past the edge of the ball and melt or blow away parts of the
ball. We measure our patches and tweak our loads with micrometers to
find the right ball and patch combination to achieve this mythical goal,
so that we can provide that perfect seal. But, even in the best of guns,
time lapse photography shows that gases make it past the patched ball
and exit the barrel in front of the ball. Our guns are rifled fully to
the muzzle, and we have to use a short starter to seat the bullet or
ball. When we examine 19th Century possible bags we find no short starters
before 1870, and no loops or straps to hold the short starter in the
bag. When we examine old guns, the muzzles all appear to be worn, but
tighten up a couple of inches below the muzzle. What happened?
Davie Crockett, Daniel Boone, and Simon Kenton did not take micrometers
to the range with them to measure cloth thickness. And they surely didn't
carry such a thing through the Cumberland Pass into Kentucky, where they
spent as much as a year at a time, hunting and exploring the country
while planning to move their families west.
The Cloth they had was homespun, not cloth made at a mill. Yes, expensive
cloth was available to the wealthy city people from the mills in England
and other European countries, but the folks who explored and settled
this country lived a far rougher existence.
If they had clothes made of cloth, it was homespun wool or flax (linen).
Cotton came later. Wool was turned to thread using a spinning wheel,
and then the threads were made into cloth using looms. The cloth these
explorers had was anything but consistent, and no one had any accurate
method to measure its thickness, anyway.
The muzzles of their guns were routinely coned, or tapered, so that
the patch and ball could be pushed into the barrel quickly with the thumb,
and would be centered and slowly grabbed by the patch as it was pushed
down with the ramrod. No short starter needed. No manufacturer today
cones its barrels.
So, what was really going on back then? How did they get guns to fire
so accurately, as we know from historical accounts that they did? I believe
that the patch served one purpose, which was to center the ball in the
barrel. In a rifle, the patch did transfer the spin of the rifling to
the ball as it traveled down the barrel. But they sealed the bore from
the gases another way.
There are numerous references about longhunters keeping wasps nests
in their hunting shirts, and it is this that I believe they used to seal
the powder behind the bullet. If they ran out of wasps nest, they used
whatever was available, including rawhide, leaves, tobacco, broad grasses,
bark (especially birch bark), weeds, etc.
But the nest was desirable for a couple of reasons. First, it could
be found throughout eastern North America. Second, it is made from digested
cellulose fibers that are regurgitated by the wasps to make the nest.
It has a fine smooth silken texture to it, and it is strong, although
it can be crushed easily in the hand when dry, just as can tobacco leaves.
A pinch of wasps nest could be crushed between fingers or rolled in the
palm of the hand, and then it would be dropped down the barrel of the
gun.
About half an inch of this fine material would provide a very good seal
for the bore. It would compact under the patched ball driven down on
top of it, sealing the powder away from the patch and ball. This gives
more consistent velocity to the load, and protects the patch around the
ball from being burned, which in turn protects the ball from being melted
or cut. All of which contributes to accuracy.
The patch material
needs to be thick enough to fill the deep rifling characteristic of
a traditional muzzle loading rifle, where each groove is typically
cut 6 thousands of an inch deep. We usually use a .015" to
.020" thick cloth patch made of pillow ticking, or denim, or some
coarse cotton or linen material, and this thickness compresses sufficiently
to get down into the rifling.
So, the final secret is to find one patch and ball combination that
will serve the function of filling and cleaning out the gunk from the
rifling, as well as grabbing and centering the ball in the barrel. Then,
to seal the bore, use a separate wad or filler, such as corn meal (yes
the same kind you buy to make corn bread), PufLon (a synthetic filler
now being sold for straight wall rifle cartridges), or try wasps nest,
birch bark, tobacco, or whatever else you can find.
You can buy card wads from Butler Creek in most standard calibers and
gauges, or buy a punch from Dixie or Brownells and make your own out
of Styrofoam plates. I generally prefer to use cardboard wads, as they
hold up well in the barrel and seal well. Celotex, commonly used as an
insulating material in construction, is often used to make the thicker
shotgun wads. It can be used in rifles, too.
MARKSMANSHIP
Because we do not
have a military draft, and colleges dropped their mandatory ROTC training
for freshmen and sophomores back in 1964, young men and women today
rarely have been trained in proper marksmanship techniques. This is
the other reason why shooters look for an easy gun to shoot, with optical
sights. No one practices long range shooting standing on his or her
two legs, and the art of off-hand shooting is becoming a dinosaur,
along with my generation. See my article "Off-Hand and Trick Shooting" about
the secrets of off-hand shooting for more information about this important
subject.
LOCKS
The rest of the comments here have to do with the lock, but once you
know what is optimum, you can usually do the modifications yourself.
A propane torch will provide enough heat to let you bend the top of the
cock forward enough to get the proper angle. Use a protractor to measure
the angle, it should be 25 degrees from the bottom edge of the flint
to the face of the frizzen on contact.
The flint should strike the frizzen between 1/3 and 1/2 of the distance
up from the bottom of the frizzen. A belt sander, using your bare fingers,
and with water nearby to keep the spring cool, will allow you to reduce
the size of the V-springs to useable dimensions.
Coil springs can be cut with a Dremel tool, grinder, or diagonal pliers.
I cut them one coil at a time, then reset them in the lock and measure
the change. I do the same with the springs in my modern bolt action rifles.
You can do it, too, if you understand and obey the rules of firearm safety.
POWDER AND FLINTS
If your local gun dealer does not stock black powder, go online and
look up the Goex powder distributor for the area where you live. I found
a distributor in California that delivers to 11 states. I also see a
distributor in Montana. Certainly the distributor can tell you who his
dealers are. And, you can always contact the National Muzzle Loading
Rifle Association in Friendship, Indiana ([email protected]) for a list
of local black powder gun clubs. Members of the club will steer you to
sources for powder and flints, gun makers, and black powder gunsmiths.
Some club members order powder together so that they can get a discount
on the price, and the members buy a year's supply at one time. Flintlock
shooters also do this in buying flints, often buying a lifetime supply.
I am still using rifle flints I bought in the early '80's, at about 10
cents each.
CONCLUSION
The flintlock tips I have written above have been learned from years
of practice, trial and error experimentation, and advice from friends--some
long dead. The shooter controls how he loads his gun, whether he sets
his flint properly, how much powder he puts in the pan, whether he picks
the main charge with a vent pick before shooting, and, of course, his
shooting skills.
There really is no good reason not to own and shoot a flintlock rifle.
Yes, you can't use black powder substitutes, because they don't ignite
consistently unless they are contained in a closed chamber and lit with
a very hot flame. But, black powder can be cleaned out of a barrel with
soap and water, while you have to use smelly commercial cleaners to remove
most black powder substitute residues.
You do have to clean guns that you shoot with the substitutes, and even
with smokeless powder. There is no getting around that. You have to use
one solvent to remove the plastic that rubs off the wad in the barrel,
and another to dissolve the salts and other chemical compounds in the
residue from the black powder substitute. At the range I use a brush
to break up the crud after each shot, so that I can continue to load
and not see a change in the point of impact of my shots due to fouling
buildup.
Flintlocks are as accurate as any other gun, if the shooter can shoot.
Just check the current match records with the NMLRA and compare the scores
shot with flintlocks versus percussion guns. There is no difference.
And any modern rifle shooter would be proud to have such scores by his
name.
You deserve great kudos for having the patience to post such a long piece! Very interesting reading, and thank you.
 
I have read that long treatise twice, and all the posts that followed, and am looking for any additional information I can find. I have built and fired three cap locks, love them!
This month I ordered a Kibler Colonial, my first flintlock. I am sorta on my own in muzzleloading here, self taught as it were, so while I wait, I want to soak up as much information as possible.
 
  • Like
Reactions: RMH
When I got my first flintlock rifle some 53 years ago it was no problem to start off with. I took to it immediately, it worked fine, I knew how to feed and exercise from day one. Already familiar with guns in general and BP guns specifically I was self taught, no mentor, and had been exposed to them by movies and "maybe" books. Still had much to learn and much to ignore.

Paul was interesting to read and he had quite a bit of knowledge to share. He also espoused a great deal of misinformation. A lot of what he suggested wasn't correct nor incorrect, it was just "opinion" and all of us have those. Such personal practices were just, IMO, but these practices worked for me unlike the alternative suggestions. For instance, take wiping the bore. From the very beginning I never did swab during shooting, the loading methods I used simply rendered the practice irrelevant. And there were other particulars, with my always using leather and rejecting lead holding the flint as an example.
 
I found this very interesting article and learned a lot being new to flintlocks and thought it might help other old beginners like me.

Flintlocks: How to Shoot Them
By Paul Vallandigham


Sadly, there is such a lack of information about how to shoot traditional
muzzleloading guns, both flintlocks and percussion guns, that the consumer
is left with whatever is the newest fad, and whatever the clerk at the
local Wal-Mart doesn't know about guns. Cap and ball guns are close enough
to cartridge guns, and even to the in-line actions, that clerks can't
steer you too far wrong if you choose to buy a modern rifle or double-barreled
percussion shotgun.
But, put a flintlock on the shelf and no one knows how to make it go
bang, beyond that you have to put this rock in the cock (hammer), and
hope it sparks, and hope the sparks hit the powder in the priming pan,
and then hope the main charge in the barrel is ignited. It all sounds
like so much hard work that consumers just don't want the guns anymore.
With the new in-line actions, you use #209 shotgun primers, the same
as used to reload modern shotgun shells. You use black powder substitutes
like Triple Se7en and Pyrodex, and sometimes this comes in pre-measured
pellets, so you don't have to measure any powder! Then we have plastic
wads instead of cloth, and jacketed pistol bullets instead of round lead
balls.
Because everything
goes down the muzzle, we (properly) call them muzzleloaders, and pretend
we are doing things the way Daniel Boone and Davie Crockett, or the
men on the Lewis & Clark Expedition did it 200 years ago.
Add to that bad legislation passed by Congress to give us a little more
false security, which restricts how black powder is sold transported
and stored, and even finding a store that carries black powder is a chore.
Finding Flints? Where do you start to look? If you live on the West coast,
you are a long way from Friendship, and even Arizona, where the NMLRA
holds it winter matches and all the products you need are available,
just like at mountain rendezvous in the 1820's.
A myth has been spread by lazy, uneducated gun store clerks, and accepted
by the public, that flintlocks are hard to get to fire, are slow to fire,
and just can't be as accurate as a modern rifle shooting jacketed bullets
in front of smokeless powder. You will even hear that flintlocks are
slower firing than side action percussion guns.
Another problem that has become all too common is kind of a reverse
snobbery among some flintlock shooters, who disdain anyone who doesn't
shoot a rocklock, and don't want to teach people how its done. Some fear
the competition they will have at the rifle matches, and don't want to
give away any secrets to protect their edge--as if they are winning thousands
of dollars in prize money at any rifle match held today! They pretend
to be great shooters, who know all there is to know about flintlocks,
when they usually are just mimicking something they saw their fathers
or grandfathers do, and haven't a clue as to why it is done. The literature
on shooting a flintlock is also lacking, so it is no wonder that young
shooters have trouble finding information.
MYTHS DISPELLED
Flintlocks are actually faster to fire than a percussion gun, all things
being equal. By that I mean, if you have two side lock actions, one flint
and other percussion, and the flintlock is tuned properly (has the flint
mounted properly in the cock, has a good frizzen that sparks, the angle
of the cock will throw the sparks into the middle of the priming pan,
and the main charge has been poked with a vent pick to allow more than
one granule of powder to be ignited by the priming charge at one time),
the main charge in a flintlock will be burning before the hammer on the
percussion gun strikes the percussion cap. The priming powder ignites
and in turn ignites the main charge in the barrel before the cock finishes
its stroke and comes to a rest. The percussion gun, by design, has to
strike the cap between the hammer and the nipple to cause ignition, so
the flintlock has to fire sooner. Flintlocks fire quicker, lock time
being equal.
SECRETS
The secret of shooting flintlocks are few, but important. With the current
celebration of the Lewis and Clark Expedition 200 years ago, west coast
shooters are likely to see a lot of flintlocks being fired at ceremonies.
So will people all along the Missouri and Mississippi Rivers from Wood
River Illinois, where the expedition began, to Astoria Oregon, where
it wintered over 1805-6 before returning. When you watch the flintlock
shooters, check to see if they do the following:
1. In a flintlock, you don't pack the powder by ramming the ball down
hard on the powder charge. A flintlock has to burn the powder one granule
at a time, while a percussion cap sends a flame burning or pushing its
way through the powder charge, igniting lots of powder all at once. A
percussion cap actually detonates the powder, much like the primer in
a cartridge does today.
The flintlock was designed to start a fire that quickly ignites all
the powder to create the gases needed to expel the projectile. Load the
ball using a marked ramrod, so that you load to a mark you have made
on the ramrod that represents where the ball just begins to touch the
powder under it. (You can feel and sometime hear a grinding action when
the ball touches the powder). Leave extra air between powder granules,
to speed the burning process in a flintlock. Actually, there is enough
oxygen in the powder itself to provide all the O2 it needs for combustion.
But extra oxygen helps it burn faster. (That is the secret!)
2. A flintlock works
best if your priming pan is wide and shallow, holding the powder over
a wider surface so that regardless of how you set the flint in the
jaws of the cock the sparks will hit priming powder and ignite it.
This may require use of a Dremel tool to grind the sides of the current
locks to widen them, but the effort will pay off with more positive
and faster ignition. There is nothing more conducive to a flinch than
a misfire, or a "flash in the pan."
Polish the surface of the priming pan to a mirror finish so that it
attracts less moisture from the air to foul your prime. A smooth finish
also makes it easier to wipe out residue after the prime has burned,
so that the residue does not attract water.
In humid areas or conditions, use the same powder used in the main charge
to prime your gun. Leave the 4F priming powder for sunny days at the
range. The coarser powder will burn just a tad slower, but that time
is measured in millionths of a second, and you won't hear the difference
or react differently in the interval between the two powders.
I also find that in some guns it helps to bank the powder in the pan
away from the touchhole, so that there is air under and around the touchhole
for the flame to go towards. This helps direct the flame from the prime
into the touchhole and to the main powder charge. Make sure the touchhole
is above the priming pan, and never cover the touchhole with powder.
There are compounds sold that you can mix with your prime to decrease
its affinity for water, but no one with much experience relies on these
compounds in lieu of common sense. When I hunt in the rain, I leave my
priming pan dry, with a feather or toothpick in the touchhole to keep
moisture out of the main charge. I wrap the muzzle with plastic. If you
are trying to be period correct, a leather collar that has been water
proofed using tallow, or some other grease, can be tied over the muzzle.
Animals such as deer and elk move slowly when its raining, if they move
at all, because they are robbed of their sense of hearing by the sound
of all the raindrops hitting branches and leaves around them. That gives
a hunter time to take the feather out of the touchhole, remove the muzzle
cover, prime the pan, cock the hammer, and take an aimed shot while the
quarry is still in sight.
Wipe the underside of the flint with a swipe of your index finger as
you cock the hammer. This removes moisture that may have condensed on
the underside, where you can't see it, and your gun should fire as expected.
It works for me. I killed a wild boar in Eastern Tennessee one Labor
Day weekend when it was about 85 degrees and raining, with my .50 caliber
flintlock rifle. I wore a poncho to keep both my rifle and me dry, my
gun tucked under my arm so that my body could keep moisture out of the
lock. My leather hat with the broad brim kept water out of the priming
pan when I loaded it.
3. Use a vent pick to poke a channel in the main powder charge in the
barrel. This allows room for the flame from the prime to enter the barrel
through the touchhole, and burn several granules of powder simultaneously.
This speeds ignition so much that I have had club members come up to
me while reloading to ask if I am shooting a flintlock or a percussion
gun! When I show them the flint action, they all want to know how I do
that. Now you know.
4. Wrap your flints with lead, not leather. Leather tends to act as
a shock absorber, and the flint will rebound or bounce off the face of
the frizzen just at the time it is cutting into the steel and starting
to shear off bits of steel at the high temperature required to ignite
the priming powder below. Instead, when the flint rebounds, it tears
bits of steel off that are then caught on the edge of the flint. The
second repeat hit will produce a few sparks that may ignite the prime.
Within a few shots there will be usually so much steel clogging the
edge of the flint that it will not throw a spark from the frizzen into
the pan. Misfire! Then you will see the shooter take out his knife, or
a hammer, or some other device, and begin pounding on the front edge
of the flint. He has to knock off enough of the edge to make a new one,
free of the bits of steel that are clogging the edge. That takes at least
20 shots out of a flint, takes time, leads to flinching, and a general
distrust and dislike of flintlocks in general. Finally the shooter buys
another muzzleloader that uses percussion caps or shotgun primers for
ignition! And all because he wrapped the flint in a leather shock absorber
instead of lead.
Lead does not give, or bounce, and it doesn't let a flint bounce when
it hits the frizzen. Lead holds the flint firmly in the jaws of the cock,
and provides weight to drive the flint into the frizzen and down in a
scraping action to cut and throw very hot steel bits into the priming
pan. If the lock is tuned properly, the angle of the cock to the frizzen
will be correct and the flint will not only scrape steel from the frizzen
in one continuous stroke, but will be self-knapping. That is, it will
make a new edge every time the gun is fired. There will be no need to
knap the flint, as it will not clog its edge with steel.
It takes a few shots
for a flint to "set up" in lead, unlike
a leather wrap, so you have to initially check the tension on your cock
screw about every 5 shots, but it will hold the flint firmly once the
lead forms to the smooth surfaces of the flint. About every 30 shots
you will need to check the flint to see where it is throwing the sparks.
You may have to move it forward in the cock, and use a piece of twig
behind the lead wrap to keep the flint wedged in the forward position.
Aren't you glad that Mother Nature provides us with twigs virtually everywhere?
5. Springs. Most modern locks have springs that are out of balance and
are too strong. The result is that they crush expensive flints, and damage
the frizzen unnecessarily, and jar the gun, making it difficult to achieve
consistently tight groups. The frizzen spring should provide such tension
that it takes no more than 3 pounds of weight to open the frizzen.
Use a trigger pull gauge to measure it. Just hook the trigger pull gauge
over the top of the frizzen, and slowly pull in a straight line forward
until the frizzen opens. Another test is take the frizzen spring off,
and put some priming powder in the pan. If the cock is angled correctly
and the flint set properly in the jaws, the flint should cut steel and
fire the prime without the frizzen spring providing resistance.
The mainspring only needs to be about 10 pounds to ensure proper ignition.
Today's locks often require more than 40 pounds of tension to cock them.
Put your rifle or shotgun butt down on your bathroom scale, make a note
of the weight of the rifle on the scale, and then slowly cock the hammer
back to full cock while watching the dial of the scale. Subtract the
original weight of the rifle, and you have the amount of spring tension
measured in pounds.
If your gun is a large musket with a large lock, the spring may be even
heavier than 40 lbs. Those big locks require very expensive flints, and
I have seen men with locks that literally shattered the stone in one
blow. Even in the days of the Brown Bess, paper cartridges came boxed
20 to a package, and with a new flint for the gun. They did not expect
the flints to shoot more than 20 times before being replaced!
Think you are better off with the new in-lines? I doubt it. Modern arms
makers want to protect themselves from product liability lawsuits, so
they sell us guns that are intentionally over-engineered. That means
heavy springs. Can't shoot consistent groups because of the hammer jolt
that shakes the gun when you fire? You will need to do something about
those springs. A competent gunsmith can reduce the tension on the V-springs
found on modern replica flintlock actions. He can remove the rattle and
tickle that destroys accuracy, while still allowing your gun to shoot
each time you pull the trigger and save your flints.
The large rifle flints I use in my American 20 gauge fowler can get
60-80 shots per flint. MY .50 caliber rifle gets about 80-100 shots per
flint using medium sized rifle flints. The large flint I use in my fowler
run about a dollar each at retail, and the smaller rifle flints run between
60 and 75 cents each. That means it costs me about .0125 cents for each
shot fired in my fowler, cheaper than the cost of shotgun primers, and
about .0075 cents every time I fire my .50 cal. rifle. That is cheaper
than large rifle primers.
6. For the past 60 years or more we have been stuck with the idea that
the cloth patch we use with a round ball performs two functions: it grabs
the ball and imparts the spin of the rifling to the ball as it travels
down the barrel, and it seals the bore so that gases behind the ball
cannot cut past the edge of the ball and melt or blow away parts of the
ball. We measure our patches and tweak our loads with micrometers to
find the right ball and patch combination to achieve this mythical goal,
so that we can provide that perfect seal. But, even in the best of guns,
time lapse photography shows that gases make it past the patched ball
and exit the barrel in front of the ball. Our guns are rifled fully to
the muzzle, and we have to use a short starter to seat the bullet or
ball. When we examine 19th Century possible bags we find no short starters
before 1870, and no loops or straps to hold the short starter in the
bag. When we examine old guns, the muzzles all appear to be worn, but
tighten up a couple of inches below the muzzle. What happened?
Davie Crockett, Daniel Boone, and Simon Kenton did not take micrometers
to the range with them to measure cloth thickness. And they surely didn't
carry such a thing through the Cumberland Pass into Kentucky, where they
spent as much as a year at a time, hunting and exploring the country
while planning to move their families west.
The Cloth they had was homespun, not cloth made at a mill. Yes, expensive
cloth was available to the wealthy city people from the mills in England
and other European countries, but the folks who explored and settled
this country lived a far rougher existence.
If they had clothes made of cloth, it was homespun wool or flax (linen).
Cotton came later. Wool was turned to thread using a spinning wheel,
and then the threads were made into cloth using looms. The cloth these
explorers had was anything but consistent, and no one had any accurate
method to measure its thickness, anyway.
The muzzles of their guns were routinely coned, or tapered, so that
the patch and ball could be pushed into the barrel quickly with the thumb,
and would be centered and slowly grabbed by the patch as it was pushed
down with the ramrod. No short starter needed. No manufacturer today
cones its barrels.
So, what was really going on back then? How did they get guns to fire
so accurately, as we know from historical accounts that they did? I believe
that the patch served one purpose, which was to center the ball in the
barrel. In a rifle, the patch did transfer the spin of the rifling to
the ball as it traveled down the barrel. But they sealed the bore from
the gases another way.
There are numerous references about longhunters keeping wasps nests
in their hunting shirts, and it is this that I believe they used to seal
the powder behind the bullet. If they ran out of wasps nest, they used
whatever was available, including rawhide, leaves, tobacco, broad grasses,
bark (especially birch bark), weeds, etc.
But the nest was desirable for a couple of reasons. First, it could
be found throughout eastern North America. Second, it is made from digested
cellulose fibers that are regurgitated by the wasps to make the nest.
It has a fine smooth silken texture to it, and it is strong, although
it can be crushed easily in the hand when dry, just as can tobacco leaves.
A pinch of wasps nest could be crushed between fingers or rolled in the
palm of the hand, and then it would be dropped down the barrel of the
gun.
About half an inch of this fine material would provide a very good seal
for the bore. It would compact under the patched ball driven down on
top of it, sealing the powder away from the patch and ball. This gives
more consistent velocity to the load, and protects the patch around the
ball from being burned, which in turn protects the ball from being melted
or cut. All of which contributes to accuracy.
The patch material
needs to be thick enough to fill the deep rifling characteristic of
a traditional muzzle loading rifle, where each groove is typically
cut 6 thousands of an inch deep. We usually use a .015" to
.020" thick cloth patch made of pillow ticking, or denim, or some
coarse cotton or linen material, and this thickness compresses sufficiently
to get down into the rifling.
So, the final secret is to find one patch and ball combination that
will serve the function of filling and cleaning out the gunk from the
rifling, as well as grabbing and centering the ball in the barrel. Then,
to seal the bore, use a separate wad or filler, such as corn meal (yes
the same kind you buy to make corn bread), PufLon (a synthetic filler
now being sold for straight wall rifle cartridges), or try wasps nest,
birch bark, tobacco, or whatever else you can find.
You can buy card wads from Butler Creek in most standard calibers and
gauges, or buy a punch from Dixie or Brownells and make your own out
of Styrofoam plates. I generally prefer to use cardboard wads, as they
hold up well in the barrel and seal well. Celotex, commonly used as an
insulating material in construction, is often used to make the thicker
shotgun wads. It can be used in rifles, too.
MARKSMANSHIP
Because we do not
have a military draft, and colleges dropped their mandatory ROTC training
for freshmen and sophomores back in 1964, young men and women today
rarely have been trained in proper marksmanship techniques. This is
the other reason why shooters look for an easy gun to shoot, with optical
sights. No one practices long range shooting standing on his or her
two legs, and the art of off-hand shooting is becoming a dinosaur,
along with my generation. See my article "Off-Hand and Trick Shooting" about
the secrets of off-hand shooting for more information about this important
subject.
LOCKS
The rest of the comments here have to do with the lock, but once you
know what is optimum, you can usually do the modifications yourself.
A propane torch will provide enough heat to let you bend the top of the
cock forward enough to get the proper angle. Use a protractor to measure
the angle, it should be 25 degrees from the bottom edge of the flint
to the face of the frizzen on contact.
The flint should strike the frizzen between 1/3 and 1/2 of the distance
up from the bottom of the frizzen. A belt sander, using your bare fingers,
and with water nearby to keep the spring cool, will allow you to reduce
the size of the V-springs to useable dimensions.
Coil springs can be cut with a Dremel tool, grinder, or diagonal pliers.
I cut them one coil at a time, then reset them in the lock and measure
the change. I do the same with the springs in my modern bolt action rifles.
You can do it, too, if you understand and obey the rules of firearm safety.
POWDER AND FLINTS
If your local gun dealer does not stock black powder, go online and
look up the Goex powder distributor for the area where you live. I found
a distributor in California that delivers to 11 states. I also see a
distributor in Montana. Certainly the distributor can tell you who his
dealers are. And, you can always contact the National Muzzle Loading
Rifle Association in Friendship, Indiana ([email protected]) for a list
of local black powder gun clubs. Members of the club will steer you to
sources for powder and flints, gun makers, and black powder gunsmiths.
Some club members order powder together so that they can get a discount
on the price, and the members buy a year's supply at one time. Flintlock
shooters also do this in buying flints, often buying a lifetime supply.
I am still using rifle flints I bought in the early '80's, at about 10
cents each.
CONCLUSION
The flintlock tips I have written above have been learned from years
of practice, trial and error experimentation, and advice from friends--some
long dead. The shooter controls how he loads his gun, whether he sets
his flint properly, how much powder he puts in the pan, whether he picks
the main charge with a vent pick before shooting, and, of course, his
shooting skills.
There really is no good reason not to own and shoot a flintlock rifle.
Yes, you can't use black powder substitutes, because they don't ignite
consistently unless they are contained in a closed chamber and lit with
a very hot flame. But, black powder can be cleaned out of a barrel with
soap and water, while you have to use smelly commercial cleaners to remove
most black powder substitute residues.
You do have to clean guns that you shoot with the substitutes, and even
with smokeless powder. There is no getting around that. You have to use
one solvent to remove the plastic that rubs off the wad in the barrel,
and another to dissolve the salts and other chemical compounds in the
residue from the black powder substitute. At the range I use a brush
to break up the crud after each shot, so that I can continue to load
and not see a change in the point of impact of my shots due to fouling
buildup.
Flintlocks are as accurate as any other gun, if the shooter can shoot.
Just check the current match records with the NMLRA and compare the scores
shot with flintlocks versus percussion guns. There is no difference.
And any modern rifle shooter would be proud to have such scores by his
name.
Lots of great information in this answer. Keeping the pan smooth and making it wide..things I never thought of before. Lots of new things for me to try. Thank you!
 
Flintlocks are actually faster to fire than a percussion gun
Ill take that race against any cap gun.
My Chambers Late Ketland has the fastest lock time of any type BP lock made.
Then it was jeweled by Mr Rice Sr.

Flintlocks are faster, you need a stop action camera to make the race fair.
No air in the cylinder to snuff out, or impede the fire from making it to the charge.

To many professionals would argue this point.
 
I am interested in learning what the misinformation and disagreements are with Paul's article. I have been shooting traditional percussion muzzleloaders for over 50 years but am new to flintlock shooting, about 4 months now, and there certainly some differences which I am learning. So how about sharing some of the specifics on where you, meaning those of you who disagree with him, think Paul was wrong?
 
I think it’s a great article that needs to be whittled down or simply restructure it. I would not diss him for compiling his life’s lessons every one has their own ideas. New shooters need to know the basics. I like many of his ideas though some many are not practical for the new shooter. It’s certainly carries a lot of great info that as you progress you may want to incorporate into your shooting. Happy Shooting!
 
I am interested in learning what the misinformation and disagreements are with Paul's article. I have been shooting traditional percussion muzzleloaders for over 50 years but am new to flintlock shooting, about 4 months now, and there certainly some differences which I am learning. So how about sharing some of the specifics on where you, meaning those of you who disagree with him, think Paul was wrong?
It’s all good 👍 but is not mandatory.
As an example I used to shoot old colts. The general loading IMO of a cylinder today is powder card felt wad lube ball. Why because the lube reduces fouling. You can just load powder and ball but that causes fouling issues. So I was wondering why not load the rifle the same way. For last year I load powder, tow, a dab of lube, followed by patch and ball. I can shoot any of my flint locks all day with no loading issues ex. Hanging on the range rod to get the patch and ball down and for the accuracy no change. I have not seen much of that discussed here the wasp nest yes but mostly in smooth bores both forward of the powder and the shot or ball. No mention of lube to keep the barrel clean and the fouling soft. I also like the mention of tapering the muzzle. I will eventually do all my rifles and finally get that short starter out of my bag. Certainly not a beginner requirement
 
Status
Not open for further replies.
Back
Top