• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

dry balled

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
All this makes me wonder what the Mountain Men did when they dry balled during a disagreement with the Blackfoot. Probably lost some hair and that was the last we heard of them. Probably weren't too many who lived by the handle "Ol' Dry Ball".
On those occasions your rifle converted to a club...and 'hawks and Bowies became gamechangers...or not.
 
Use the proper puller and
1, you will not screw all the way through the ball.
2, the brass collar will insure you screw in to the center of the ball, no collar and you screw in to the side of the ball and possibly damage the rifling and you are pulling on the side of the ball trying to rotate it while pulling.

1651921604074.png


One more thing, devising a way to secure the ramrod ("T" handle, cordage attached to ramrod etc.) and then pulling on the rifle makes it very easy to do.

All that aside, I still recommend trickling a little powder in and shooting them out.
 
All this makes me wonder what the Mountain Men did when they dry balled during a disagreement with the Blackfoot. Probably lost some hair and that was the last we heard of them. Probably weren't too many who lived by the handle "Ol' Dry Ball".
"Ol Dry Ball" sounds like a washed up porn star.
 
This has me thinking that maybe someone ought to come up with a airgun conversion for a muzzleloader. A large caliber airgun is quite potent in its own right. So there might be something to it. But maybe it’s the crazy ramblings of a old guy that hadn’t had enough coffee yet.
It is a little late for that. The air rifle was used during the Napoleonic wars. I read that any of the enemy caught with an air gun was excecuted on the spot? I have seen pictures of the air rifles used and the air chamber was on top of the rifle? I wonder how they were aimed?
 
With percussion ignition, I clear the barrel by putting an "O" ring or two over the nipple and removing the "fine" nozzle from my air gun. Once you have the right match of those two, barrels are easily cleared.
 
only if you point it at the TV.
which i don't have! won't have! and further more i HATE!

i still haven't found the ball in my shop mess. want to see how the rifling engraves at that point.
maybe i should clean the shop more and shoot less?

NAW! ain't in me.
Hmmmmm. Seems we have the same numbers of TV sets!
 
2, the brass collar will insure you screw in to the center of the ball, no collar and you screw in to the side of the ball and possibly damage the rifling and you are pulling on the side of the ball trying to rotate it while pulling.

One more thing, devising a way to secure the ramrod ("T" handle, cordage attached to ramrod etc.) and then pulling on the rifle makes it very easy to do.

All that aside, I still recommend trickling a little powder in and shooting them out.
Some good advice, but I don't think I have ever shot one out. Imbed a collar ball puller as you show while the bullet is snug, then dump a teaspoon amount of WD40, wait 5 minutes. Slicker than snot on a door knob!
Larry
 
Last edited:
only if you point it at the TV.
which i don't have! won't have! and further more i HATE!

i still haven't found the ball in my shop mess. want to see how the rifling engraves at that point.
maybe i should clean the shop more and shoot less?

NAW! ain't in me.
The patch engages the riflng, so there may not be any rifling marks to examine...
I guess CSI-type forensic ballistics were a little tougher area of study in the 18th century!
 
Last edited:
Back
Top