• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

FOR SALE Double barrel shotgun locks, stock, no barrels

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

alcessapiens

40 Cal
Joined
Oct 1, 2022
Messages
366
Reaction score
619
Location
Central NY
Don’t know who made this maybe cva? The breech fits my .58 double rifle barrels but this isn’t a pedersoli. Both Locks are strong and work well. Checkering is worn flat. Has a lovely patina ( antique dealer speak for “ I cleaned the rust and crud off.” ). $150+ shipping
 

Attachments

  • image.jpg
    image.jpg
    2.1 MB · Views: 4
  • image.jpg
    image.jpg
    1.9 MB · Views: 0
  • image.jpg
    image.jpg
    1.3 MB · Views: 0
  • image.jpg
    image.jpg
    1.6 MB · Views: 0
  • image.jpg
    image.jpg
    1.4 MB · Views: 0
  • image.jpg
    image.jpg
    1.5 MB · Views: 0
  • image.jpg
    image.jpg
    1.2 MB · Views: 0
  • image.jpg
    image.jpg
    2.1 MB · Views: 0
That's a nice piece just have to find the barrels for it. I've restored two like that I think it is Belgium made very nice
 
Sir I have a CVA 12ga double and I may be interested if I can use your stock. Can you give me some measurements? Distance and spacing on tang area. Measure the total width inside from Left lock plate to inside of Right lock plate. Also, from metal tang where barrels set to the center of the pin that holds barrels in stock. Also from center of right hammer to center of Left hammer. Thanks Trans Yank
 
Back
Top