• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

SOLD Dixie Gun Works 20 gauge Double Barrel Shotgun

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.

waarp8nt

Smidgin Injun
MLF Supporter
Joined
Dec 15, 2016
Messages
1,118
Reaction score
2,436
Location
East of the Kaskaskia River in Illinois Country
I have for sale a Dixie Gun Works 20 gauge Double Barrel Shotgun. It is fairly clean with a little bluing gone around the nipple area, there was not butt plate on this model. The bore is decent with some factory machine / tool marks in it (in my opinion it could used honed with a cleaning rod in a drill and some scotch brite on jag). Everything seems to function as it should. Please see pictures, I attempted to get the best pictures possible, yet I couldn't get a good picture of the bore. There is a scratch near the patchbox, I could catch my nail on it (slightly). Asking only $150 shipped (or $135 plus $15 shipping). I prefer postal money order, but will take other payments on agreement of purchase. Only trades considered would be a complete ragged out T/C Renegade or Hawken (rotten bore would be just fine). Please post then PM if interested.

Resized_20190113_092040.jpeg
Resized_20190113_092051.jpeg
Resized_20190113_092059.jpeg
Resized_20190113_091932_001.jpeg
 
Eterry
When you get your shotgun you might be interested in this post I made about mine.

One of the things I noticed is there is a lack of something to guide the barrel into the stock so I built a small steel block that engages the underlug on the bottom of the barrel. I don't have a milling machine so all of the work was done with a hack saw and files.
Follow this link to see what I'm talking about. (go to page 2 of the linked post).

https://www.muzzleloadingforum.com/threads/cva-12-guage-double-barrel.70939/#post-878923
 
Status
Not open for further replies.
Back
Top