• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

CLOSED CVA .36 “Squirrel” rifle barrel

Muzzleloading Forum

Help Support Muzzleloading Forum:

Joined
Aug 20, 2004
Messages
146
Reaction score
74
Location
Alabama
Looking for a CVA Squirrel rifle .36 caliber complete barrel assembly and/or barrel. They are labeled “squirrel”.

Please let me know what you might have by conversation message on this forum.

Thanks for looking,
Dan
 
Last edited:
Joined
Aug 20, 2004
Messages
146
Reaction score
74
Location
Alabama
Still looking for that illusive CVA .36 Squirrel rifle barrel.

Apparently, from what little history of CVA and their "Squirrel" rifle that I can find, indicates that the .36 SQUIRREL was made in 1989 and for a few years after and then discontinued approximately 1993-94 when CVA moved on to other than traditional ventures.

Please let me know what you might have through a conversation/message through this site.

Kind Regards,
Dan
 
Joined
Nov 23, 2020
Messages
289
Reaction score
124
Location
Washington state
Unfortunately, the one I just saw listed at gunbroker is a .32.
I am looking for a .36 but thanks for the info.

Dan
Hey Dan try these guys they have all different cal muzzleloader barrels available
 

Attachments

  • Screenshot_20221129-143102_Chrome.jpg
    Screenshot_20221129-143102_Chrome.jpg
    603.4 KB · Views: 0
Joined
Aug 20, 2004
Messages
146
Reaction score
74
Location
Alabama
Thanks for the information Harleynut. Those drop-in barrels are 15/16” & 1” across the flats. They should fit the T/C Hawken and Renegade respectively.

The CVA Squirrel .36, .32, & .45 barrels are all 3/4” across the flats.

Thanks again,
Still a lookin’,
Dan
 
Top