• If you have bought, sold or gained information from our Classifieds, please donate to Muzzleloading Forum and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

WITHDRAWN Couple Revolvers

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
Joined
Oct 24, 2022
Messages
942
Reaction score
678
Location
Texas
#1 Pietta Griswold and Gunnison look alike but in 44 caliber. I have personally shot this revolver. Good action, no issues. .454 with 25gr fffg. #10 caps. Has a nice used patina. As with most of these revolvers it shoots high.

#2 ASM Colt 1860 Army snubbie. 3-3/8 barrel. I have not shot this one. Got it in a trade. The grips are over size and could use some fitting. The front bead sight looks kinda boogered up. The hammer travel to full cock goes all the way back and then forward a bit. Have not tried to correct it since the timing is good and locks up good on full cock. Half cock is fine.
shipped. $550 for both.

Am looking for an 1851 Navy (no 44s) in a steel frame and a Confederate barrel in 36 caliber.
Feel free to make offers. The price reflects what I have in them plus the ride.
more pictures please ask. Can only attach 10
 

Attachments

  • 20221101_114912.jpg
    20221101_114912.jpg
    3 MB · Views: 5
  • 20221101_115005.jpg
    20221101_115005.jpg
    1,012.2 KB · Views: 0
  • 20221101_115010.jpg
    20221101_115010.jpg
    2.2 MB · Views: 0
  • 20221101_115037.jpg
    20221101_115037.jpg
    2.2 MB · Views: 0
  • 20221101_114852.jpg
    20221101_114852.jpg
    2.9 MB · Views: 0
  • 20221101_114916.jpg
    20221101_114916.jpg
    3.1 MB · Views: 0
  • 20221101_114925.jpg
    20221101_114925.jpg
    3.3 MB · Views: 0
  • 20221101_114928.jpg
    20221101_114928.jpg
    3.2 MB · Views: 0
  • 20221101_114933.jpg
    20221101_114933.jpg
    2.8 MB · Views: 0
  • 20221104_142421.jpg
    20221104_142421.jpg
    1.2 MB · Views: 0
20221101_110635.jpg
 

Attachments

  • 20221101_112846_001.jpg
    20221101_112846_001.jpg
    1 MB · Views: 0
  • 20221101_110713.jpg
    20221101_110713.jpg
    2.7 MB · Views: 0
  • 20221101_110700.jpg
    20221101_110700.jpg
    1.3 MB · Views: 0
  • 20221101_110729.jpg
    20221101_110729.jpg
    2.3 MB · Views: 0
  • 20221101_110719.jpg
    20221101_110719.jpg
    2.7 MB · Views: 0
  • 20221101_110643.jpg
    20221101_110643.jpg
    1.3 MB · Views: 0
Hi Jappo,
Trade's, what is a "Confederate" barrel your looking for?

p.s. the 1860 Army's I've seen have round barrels,(?)
 
So if there are multiple items for sale, you must sell then together, according to ad rules. The ad was edited for that. If you wish to sell them apart, please remove the above ad and post them one at a time. Thanks

LD
Oh ok, did not know that. I'll read them again. Guess I missed that.
Thank you
 
Hi Jappo,
Your looking for trades, what is a "Confederate" barrel?

p.s. the 1860 Army's I've seen have round barrels,(?)
A Confederate barrel is a Leech and Rigdon, Griswold and Gunnison or a Dance Brothers. All are 36 caliber with round barrels and 1851 Colt Navy style loading lever.
 
Looks like an 1860. Has the extra screws for a shoulder stock. I looked at the emblem on the bottom of the frame where the serial numbers usually are. It close to the trigger guard. Looks like an A. The frame might be an Uberti. I'll take a closer look tomorrow.
 
Status
Not open for further replies.
Back
Top