• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Completed Woods runner fully dressed.

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Sep 29, 2021
Messages
135
Reaction score
257
Location
Maine
I ordered this during Kiblers pre-order back in May. Assembled the kit as most have done in 5-6 hours. Finish and carving took significantly more time. Rifle is 54 caliber. Stock is a standard grade sugar maple stock with some heart wood showing at the wrist and on the fore end. Finished the wood with tanic acid and iron nitrate then rubbed back stain. Finished with tried and true varnish oil 4 coats topped with a good wood wax. Metal finished with JAX Black on both iron and brass then rubbed back. Carving done was add fore stock molding and final, butt stock molding, lock panels, tang carving, comb carving, patch box carving, and cheek piece carving. All was a mix of incised and relief carving.Fore stock final was a relief cared curve transitioning to an incised carved curve with some chip carving extending back. Patch box lid was done with incised border and finals. Cheek piece was done with incised carving at the leading edge, incised lines on the cheek piece extending back to the first curl and a relief carved line transitioning to an incised carved curl at the rear. Remainder of carving is all relief carving for lock panels , tang carving and head of comb carving. Can't wait to sight her in and give here a name!
IMG_2771.JPG
IMG_2777.JPGIMG_2779.JPGIMG_2781.JPGIMG_2782.JPGIMG_2783.JPGIMG_2784.JPGIMG_2785.JPGIMG_2787.JPG
 
Back
Top