• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Clay Smith Trade Gun Build

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Got back to work on the stock today. Finished inletting the barrel and marked, measured, drilled, and pinned the barrel. The little marking tool a made a month or so ago came in handy. Next step is inletting the lock plate.
 

Attachments

  • 5A7DE24A-1754-4C8B-BBF2-197E35B9B00E.jpeg
    5A7DE24A-1754-4C8B-BBF2-197E35B9B00E.jpeg
    2.7 MB · Views: 0
  • 075FC319-1F28-4251-87CE-FA8EDAFF2D74.jpeg
    075FC319-1F28-4251-87CE-FA8EDAFF2D74.jpeg
    2.9 MB · Views: 0
  • A2E1C652-DBC4-4DD1-863D-89A653B2A380.jpeg
    A2E1C652-DBC4-4DD1-863D-89A653B2A380.jpeg
    2.9 MB · Views: 0
  • C8B2C602-2578-463B-AB07-822E56320AB6.jpeg
    C8B2C602-2578-463B-AB07-822E56320AB6.jpeg
    1.5 MB · Views: 0
  • 5EEC1CC9-8EF4-4324-A246-19F0F7E305DF.jpeg
    5EEC1CC9-8EF4-4324-A246-19F0F7E305DF.jpeg
    3 MB · Views: 0
  • 01010DE7-4E4E-40BF-9EEE-C09052A0EA0C.jpeg
    01010DE7-4E4E-40BF-9EEE-C09052A0EA0C.jpeg
    1.7 MB · Views: 0
  • 19390A7D-92AC-4174-A800-8B4375439827.jpeg
    19390A7D-92AC-4174-A800-8B4375439827.jpeg
    1.3 MB · Views: 0
  • 6F396164-180F-4EB9-99B6-30E6C1CA14BF.jpeg
    6F396164-180F-4EB9-99B6-30E6C1CA14BF.jpeg
    2.4 MB · Views: 0
  • E4EA916B-820C-4775-B3E2-557FF87E020F.jpeg
    E4EA916B-820C-4775-B3E2-557FF87E020F.jpeg
    1,006.6 KB · Views: 0
  • FD7AD36A-77C0-45C4-953F-0AFB9F2C2054.jpeg
    FD7AD36A-77C0-45C4-953F-0AFB9F2C2054.jpeg
    2.4 MB · Views: 0
Enletted the lock plate today. It was a little tedious for a couple of reasons, this was only my 2nd time to do this and the pre-inlet was for a round tail lock. Actually had a very slight gap on the bottom left to start with. Forgot to take a photo to show what I started with. And I over did one of my first cuts at the top behind the pan. I’ve since cut and glued a sliver of maple there, so that gap will disappear. Thought I’d spend 2 or 3 hours deburring and polishing the lock parts, but that was not to be. I take back every bad word I’ve said against L & R locks! This Davis lock, at least the one I have, is not good at all. Casting marks and flash everywhere. The plate cleaned up ok, but not great. Where I really spent time was on the frizzen. It was ugly, the good thing was that it was hard, the bad thing was that it was hard, so it took a number of different methods to smooth the front. I used diamond needle files and finally some fine dremal bits to get rid of the scale. Still not happy with it, but it was enough for the day. Tomorrow I’ll finish going over the lock and finish the inletting.
 

Attachments

  • 60880EE1-718D-4320-8A7F-EC427474FA30.jpeg
    60880EE1-718D-4320-8A7F-EC427474FA30.jpeg
    2.7 MB · Views: 0
  • 0D3913FC-455B-4D90-8DD7-F4F564A956A0.jpeg
    0D3913FC-455B-4D90-8DD7-F4F564A956A0.jpeg
    2.5 MB · Views: 0
  • 4D9C06FC-00D2-470F-81F9-898A1A653452.jpeg
    4D9C06FC-00D2-470F-81F9-898A1A653452.jpeg
    1.8 MB · Views: 0
  • F235BD65-1700-4630-BE4E-5FFD23188BEB.jpeg
    F235BD65-1700-4630-BE4E-5FFD23188BEB.jpeg
    1.4 MB · Views: 0
  • 0622EE37-3916-4B8F-812B-FF5C6941418D.jpeg
    0622EE37-3916-4B8F-812B-FF5C6941418D.jpeg
    1.5 MB · Views: 0
  • 6E4688F8-C438-4C3E-83AA-DF80C1AE6BAD.jpeg
    6E4688F8-C438-4C3E-83AA-DF80C1AE6BAD.jpeg
    2.9 MB · Views: 0
  • 96297A34-F9F6-480B-8CCB-4CDBB8A953CB.jpeg
    96297A34-F9F6-480B-8CCB-4CDBB8A953CB.jpeg
    2 MB · Views: 0
  • A712E4FD-73BE-4C98-8840-C52BA25EB243.jpeg
    A712E4FD-73BE-4C98-8840-C52BA25EB243.jpeg
    805.1 KB · Views: 0
Got back to work on the stock today. Finished inletting the barrel and marked, measured, drilled, and pinned the barrel. The little marking tool a made a month or so ago came in handy. Next step is inletting the lock plate.
Sir what is the size of wire holding in your barrel ( barrel pins).thanks walt
 
Only took a day and a half, but the lock is polished and back together. There wasn’t one piece that didn’t need attention. I hadn’t noticed that the frizzen spring suffered from the same flash and burrs as the mainspring. Everything had burrs. Surprisingly the tumbler wasn’t too ratty, still needed a good stoning but not much worse than normal. Everything else needed time and effort. On the plus side, the lock is smooth now and throws very good sparks. Only fired it a few times, but it appears to be fairly quick for such a long throw lock. So all is good. Here’s a before and some after photos.
 

Attachments

  • F89459BD-DC40-4B1F-8F58-69B789168AB2.jpeg
    F89459BD-DC40-4B1F-8F58-69B789168AB2.jpeg
    2.7 MB · Views: 0
  • 83FD015B-146A-4E42-9924-1F9409FBFFF6.jpeg
    83FD015B-146A-4E42-9924-1F9409FBFFF6.jpeg
    1.6 MB · Views: 0
  • 9EE5F638-3C31-4D40-B803-3CD5D8942486.jpeg
    9EE5F638-3C31-4D40-B803-3CD5D8942486.jpeg
    2 MB · Views: 0
  • 8DFED46E-4A18-490D-B64C-B33CCA24C784.jpeg
    8DFED46E-4A18-490D-B64C-B33CCA24C784.jpeg
    1.9 MB · Views: 0
  • F41C7695-AC71-4C06-B156-94B02CA138B8.jpeg
    F41C7695-AC71-4C06-B156-94B02CA138B8.jpeg
    1.3 MB · Views: 0
Spent most of the day getting my corn patch planted but still put a few hours into fully inletting the lock. It function checks, still need to do some cleaning up.
 

Attachments

  • 459A6E20-C353-4680-B3BF-8D144F85E3AC.jpeg
    459A6E20-C353-4680-B3BF-8D144F85E3AC.jpeg
    2.6 MB · Views: 0
  • B8C7783C-D92A-4158-94A9-C4FE1828A397.jpeg
    B8C7783C-D92A-4158-94A9-C4FE1828A397.jpeg
    2.5 MB · Views: 0
  • 5656F484-9A52-4B85-844C-E47D7F6B76AC.jpeg
    5656F484-9A52-4B85-844C-E47D7F6B76AC.jpeg
    2.7 MB · Views: 0
Enletted the lock plate today. It was a little tedious for a couple of reasons, this was only my 2nd time to do this and the pre-inlet was for a round tail lock. Actually had a very slight gap on the bottom left to start with. Forgot to take a photo to show what I started with. And I over did one of my first cuts at the top behind the pan. I’ve since cut and glued a sliver of maple there, so that gap will disappear. Thought I’d spend 2 or 3 hours deburring and polishing the lock parts, but that was not to be. I take back every bad word I’ve said against L & R locks! This Davis lock, at least the one I have, is not good at all. Casting marks and flash everywhere. The plate cleaned up ok, but not great. Where I really spent time was on the frizzen. It was ugly, the good thing was that it was hard, the bad thing was that it was hard, so it took a number of different methods to smooth the front. I used diamond needle files and finally some fine dremal bits to get rid of the scale. Still not happy with it, but it was enough for the day. Tomorrow I’ll finish going over the lock and finish the inletting.
Looks good . I just bought one of these from Log Cabin today ...all they had was one after months of telling me " any day now we'll have some " ....and the problems you said of your lock ....sounds just like dealing with L&R ! Lordy .... Looks good bud . keep up the good work
 
Last edited:
Looks good . I just bought one of these from Log Cabin today ...all they had was one after months of telling me " any day now we'll have some " ....and the problems you said of your lock ....sounds just like drsling with L&R ! Lordy .... Looks good bud . keep up the good work
Thanks Rob, I almost called Log Cabin this morning to tell them about the issues with the lock, but I didn’t. But I definitely want a spare mainspring.
 
Thanks Rob, I almost called Log Cabin this morning to tell them about the issues with the lock, but I didn’t. But I definitely want a spare mainspring.
That’s what you call low quality high cost not like before when itwas high quality low cost.coming along nicely tdm.
Walt.
 
Only took a day and a half, but the lock is polished and back together. There wasn’t one piece that didn’t need attention. I hadn’t noticed that the frizzen spring suffered from the same flash and burrs as the mainspring. Everything had burrs. Surprisingly the tumbler wasn’t too ratty, still needed a good stoning but not much worse than normal. Everything else needed time and effort. On the plus side, the lock is smooth now and throws very good sparks. Only fired it a few times, but it appears to be fairly quick for such a long throw lock. So all is good. Here’s a before and some after photos.
Got my lock today ... tried to get two but ....oh well.....but any way , it has some nasty flashing on it esp. on the frikken Frizzen ! The hardest part and most prominent part on the d@mn lock .... Not cool . Glad to get the lock but there is no sense in that .... I'll be tearing of apart soon and de burying it welding up all the " engraving " on it . Sure like it better than that d@mn Curly lock !! :D
IMG_20230329_150125.jpg
IMG_20230329_150220.jpg
 
Got my lock today ... tried to get two but ....oh well.....but any way , it has some nasty flashing on it esp. on the frikken Frizzen ! The hardest part and most prominent part on the d@mn lock .... Not cool . Glad to get the lock but there is no sense in that .... I'll be tearing of apart soon and de burying it welding up all the " engraving " on it . Sure like it better than that d@mn Curly lock !! :DView attachment 210613View attachment 210614
Yep, that's the way mine was. And I found more and more issues as I disassembled it. The frizzen spring was as bad, if not worse, than the mainspring. Spent a lot of time cleaning mine up.
 
Yep, that's the way mine was. And I found more and more issues as I disassembled it. The frizzen spring was as bad, if not worse, than the mainspring. Spent a lot of time cleaning mine up.
I sure wish she had Larry Zornes making them again ...
 
@Rob M. another surprise was the lack of finish on the cock jaw bolt and the cock retaining screw. Both had deep machine swirls that couldn't be polished out. Had to put them in a drill chuck and work through sand paper grits to get them smooth. Never saw that condition before.
 
Back
Top