• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades
  • Friends, our 2nd Amendment rights are always under attack and the NRA has been a constant for decades in helping fight that fight.

    We have partnered with the NRA to offer you a discount on membership and Muzzleloading Forum gets a small percentage too of each membership, so you are supporting both the NRA and us.

    Use this link to sign up please; https://membership.nra.org/recruiters/join/XR045103

Can Anyone Tell Me What GRRW rifle I have? .45 Little Leman or Indian Trade Rifle

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

marichman

32 Cal
Joined
Apr 30, 2020
Messages
8
Reaction score
2
I have a Green River Rifle Works percussion rifle. I need help identifying what model it is. Serial 916 with .45 stamped under, so I am assuming one of the first 1,000. It's at my uncle's house, but I can get more measurements like LOP or Barrel Length. I know my uncle thinks it's worth something, but I am just trying to figure out what it is. Is this rifle desirable? Thanks in advance, I know I am asking a lot.
 

Attachments

  • IMG_4728.jpg
    IMG_4728.jpg
    149.2 KB · Views: 157
  • IMG_4727.jpg
    IMG_4727.jpg
    91.7 KB · Views: 159
  • IMG_4726.jpg
    IMG_4726.jpg
    245.2 KB · Views: 156
  • IMG_4724.jpg
    IMG_4724.jpg
    125.8 KB · Views: 148
  • IMG_4723.jpg
    IMG_4723.jpg
    146.9 KB · Views: 149
  • IMG_4725.jpg
    IMG_4725.jpg
    191.3 KB · Views: 150
  • IMG_4732.jpg
    IMG_4732.jpg
    103.9 KB · Views: 148
  • IMG_4733.jpg
    IMG_4733.jpg
    119.8 KB · Views: 149
  • IMG_4744.jpg
    IMG_4744.jpg
    159.9 KB · Views: 146
  • IMG_4743.jpg
    IMG_4743.jpg
    131.6 KB · Views: 150
If you can get the LOP and barrel length and diameter (across the flats) measurements, we can determine what model you have.

If the barrel diameter is 7/8", it could be a Leman Squirrel Rifle or a Little Leman. The difference between these two is the Squirrel rifle has a 14" LOP and the Little Leman LOP is around 13".

If the barrel diameter is 1" or larger, then it is a Leman Trade Rifle.

The bore looks a little rusty. Don't believe that rifle has seen an oiled patch in a long time. It should be cleaned up and oiled with a good rust preventative. A rusted and pitted bore can significantly reduce the rifle's value.

The tacks on the rifle is a personal thing. Some people like them and some don't.

The rifle has one of Ron Long's Hawken locks which are more desirable than the Bob Kern coil spring locks they started out with. It still has the heavier butt plate and trigger guard used on the early Lemans. These characteristics and the serial number would date it to 1975.

Thanks for sharing.
 
You asked if the rifle is desirable or worth something. I'll firmly plant my tongue in my cheek and say it isn't worth a darn and is very undesirable, so you should send it to me.

I really don't have an idea of value, but I bet most of us would be more than happy to have the rifle. Just don't sell it to someone for a couple of hundred dollars. It is definetly worth more than that.
 
The rifle is worth something, probably not as much as your uncle may think. You may have to do some research on the gun selling sites such as gunbroker to see what similar guns are selling for. As Jake said, its definitely worth more than a couple of hundred dollars.
 
Thanks for all the information- LOP looks like 14” and barrel width is an inch.

So based on the info I’ve gotten back from everyone - I have a .45 caliber Leman Trade Rifle that needs some oil and is worth more than a couple hundred bucks. I am happy to know more about this and other percussion rifles. Thx
 

Attachments

  • 33F25561-288D-4F6C-82F9-6CC19443C922.jpeg
    33F25561-288D-4F6C-82F9-6CC19443C922.jpeg
    72.9 KB · Views: 106
  • 14952A24-683B-4254-9BE8-A2824B2E1629.jpeg
    14952A24-683B-4254-9BE8-A2824B2E1629.jpeg
    94.3 KB · Views: 99
  • E3B5B979-E5EB-4BE5-BB80-A00A8D3F61DA.jpeg
    E3B5B979-E5EB-4BE5-BB80-A00A8D3F61DA.jpeg
    205.5 KB · Views: 94
You might want to take a closer look at the area around the head of the lock bolt. From the pictures it look like the bolt has been drawn up tight enough to crack the wood. Easier to fix now than after it breaks all the way.
Ferret Master
 
I like those brass tacks. Some find tacks “tacky” (pun intended) but I feel they’re right at home on this kind of Leman percussion gun. Looks like something at home in a teepee out on the plains during the 1870s. Nice rifle for sure, but please tend to that bore. If the rifling turns out to be “ruint” you can send it to Bobby Hoyt to get it relined or “freshed out” as it were.
 
You might want to take a closer look at the area around the head of the lock bolt. From the pictures it look like the bolt has been drawn up tight enough to crack the wood. Easier to fix now than after it breaks all the way.
Ferret Master
I see that, now that you point it out. Thanks for the "heads up"
 

Latest posts

Back
Top