• This community needs YOUR help today. We rely 100% on Supporting Memberships to fund our efforts. With the ever increasing fees of everything, we need help. We need more Supporting Members, today. Please invest back into this community. I will ship a few decals too in addition to all the account perks you get.



    Sign up here: https://www.muzzleloadingforum.com/account/upgrades

Caliber Opinions. First Build

Muzzleloading Forum

Help Support Muzzleloading Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Caliber for Swamped Barrel Kit

  • .54

    Votes: 16 53.3%
  • .50

    Votes: 7 23.3%
  • Other

    Votes: 7 23.3%

  • Total voters
    30
  • Poll closed .
It came.
 

Attachments

  • 20201107_141012.jpg
    20201107_141012.jpg
    76 KB · Views: 133
The bigger the caliber the more power and lead you need. 50 is big enough for any game in the US except elk and grizzly bear. 40 or 45 will kill targets as well as a 62 and they have way less recoil so are more pleasant to shoot.
 
I'm getting close to ordering a kit. Flintlock for sure. Lancaster or Colonial style. I haven't decided which kit or from whom, but that's not the point of this thread.

My question is, .50 or .54.

I'm not too concerned with historically correct calibers, but if I can get close, which one would it be? I'm leaning more toward the .54 because balls/patches are pretty easy to find, and I've never owned a .54, I read that the swamped .54's are lighter and are balanced better than the .50's.

Hit me with the facts.

-RM
.58 bigger is deffinently better
 
Barrel has been draw filed and placed in its channel after removing very little wood from the tang and bolster area. Trigger plate is installed as well.
 

Attachments

  • 20201108_233500.jpg
    20201108_233500.jpg
    193.6 KB · Views: 147
It's been suggested that I replace the brass screws on the patchbox cover with countersunk, flat head steel screws. I used these because they were on hand and they're the brass equivalent of the round head screws on the buttplate. I have a cacameme scheme, though, to peen the rounded heads over to permanently affix it to the wood.

Thoughts?
 

Attachments

  • 20201112_144751.jpg
    20201112_144751.jpg
    56 KB · Views: 87
Your gun.
But if you want it to look at all authentic, loose all of those brass screws. Brass screws were not used, At least not on any old gun I have looked over since Ike was a happy golfer.
 
@JCKelly is correct. Steel or iron screws were used. Oval headed slotted screws were used to fasten down those items that were not nailed down. Do a simple flame blue on the screw heads and your patch box fastening will look much better in my opinion. Then those screw will be consistent with the butt plate screws and the patch box latch.
 
.54, no contest. Not a shoulder buster, but packs the wallop of a ford bronco. I have a beautiful .50, but I rarely shoot it over my .54. The difference in recoil is marginal, and the .54 hits much harder at range. Anything the .50 can do, the .54 does better. Futhermore, .54 has a cool factor that the .50 just cannot rival. I am going on a Black Bear hunt next August, and my .54 will surely come along for the ride. P.S. I just realized that your rifle has already arrived...Good choice and happy shooting!
 
50

Once I was out of town and out of 54 caliber balls. Unable to find anything but 45 and 50 caliber made me wonder if I made the wrong selection for my flint Hawken.................

SS
 
I like the carving you did on the stock. Did you do what came to mind or is there something out there that you used for inspiration?

Thats a good question.

I started by looking at a bunch of pictutes of a bunch contemporary and original of rifles. I took that and ran with it. No real style, I just drew what looked good and felt balanced.
 
A couple of pictures for your enjoyment. I'm happy with my simply carved contemporary longrifle. It shoots good. A tad low at 35 yds, but I feel half of that is me. Shreds patches too. Gonna take the ol scotchbrite and smooth those rifling edges. Any other tips from the pros?
 

Attachments

  • 20210129_084420.jpg
    20210129_084420.jpg
    103.2 KB · Views: 57
  • 20210129_084352.jpg
    20210129_084352.jpg
    105.4 KB · Views: 58
  • 20210129_084437.jpg
    20210129_084437.jpg
    274.7 KB · Views: 55
  • 20210129_084401.jpg
    20210129_084401.jpg
    99.7 KB · Views: 59

Latest posts

Back
Top